|
|
Serial ATA PCI RAID
High-speed dual-channel PCI-to-Serial ATA RAID controller
|
- Supports RAID 0 (striping) for performance and RAID 1 (mirroring) for reliability
- The thin, flexible Serial ATA cable is easier to route inside a PC
- Breaks the 137 GB barrier! Supports various brands of large capacity Serial ATA hard disk drives
- Regulatory approval(s): FCC Class B (DoC) & CE
- RoHS-compliant
- Chipset: Silicon Image Sil3512
- Port type: Two Serial ATA ports
- Slot type: 32-bit PCI
- Compliant with Serial ATA Specification, revision 1.0
- Compliant with PCI Specification, revision 2.2
- Supports RAID 0 (striping) for performance and RAID 1 (mirroring) for reliability
- Coexists with Ultra ATA controller and allows you to connect up to two Serial ATA hard disks
- Features independent 256-byte FIFOs per channel for host reads and writes
- Features Watch Dog timer for fault resiliency and flash memory for future BIOS updates
- Supports 32-bit wide PCI bus at 66MHz data transfer rates up to 150 MB/s (1.5 Gb/s)
- Lower pin count and voltage requirement, plus better cabling over traditional Parallel ATA make Serial ATA the controller of the future
- Breaks the 137 GB barrier! Supports various brands of large capacity Serial ATA hard disk drives
- Two high quality SATA cables and 15-pin SATA power cables required for RAID configuration are included. One "Y" split power cable is also included to provide extra power connection!
- Country of origin: China
- Pentium® or equivalent PC with one available PCI slot
- Windows® 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000 / ME / 98SE
- Serial ATA PCI RAID
- Two Serial ATA cables
- Dual-connector SATA power cable
- "Y" split power cable
- Driver and utility software
- User's manual
- Ingram Micro: K79026
- Tech Data: 87872C
- D&H: SCSATR12S4
- ASI: 52623
- SED: SII-SCSATR12S
- Dell Harmony: A1157748
- Supports RAID 0 (striping) for performance and RAID 1 (mirroring) for reliability
- The thin, flexible Serial ATA cable is easier to route inside a PC
- Breaks the 137 GB barrier! Supports various brands of large capacity Serial ATA hard disk drives
|
- Regulatory approval(s): FCC Class B (DoC) & CE
- RoHS-compliant
- Chipset: Silicon Image Sil3512
- Port type: Two Serial ATA ports
- Slot type: 32-bit PCI
- Compliant with Serial ATA Specification, revision 1.0
- Compliant with PCI Specification, revision 2.2
- Supports RAID 0 (striping) for performance and RAID 1 (mirroring) for reliability
- Coexists with Ultra ATA controller and allows you to connect up to two Serial ATA hard disks
- Features independent 256-byte FIFOs per channel for host reads and writes
- Features Watch Dog timer for fault resiliency and flash memory for future BIOS updates
- Supports 32-bit wide PCI bus at 66MHz data transfer rates up to 150 MB/s (1.5 Gb/s)
- Lower pin count and voltage requirement, plus better cabling over traditional Parallel ATA make Serial ATA the controller of the future
- Breaks the 137 GB barrier! Supports various brands of large capacity Serial ATA hard disk drives
- Two high quality SATA cables and 15-pin SATA power cables required for RAID configuration are included. One "Y" split power cable is also included to provide extra power connection!
- Country of origin: China
|
- Pentium® or equivalent PC with one available PCI slot
- Windows® 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000 / ME / 98SE
|
- Serial ATA PCI RAID
- Two Serial ATA cables
- Dual-connector SATA power cable
- "Y" split power cable
- Driver and utility software
- User's manual
|
- Ingram Micro: K79026
- Tech Data: 87872C
- D&H: SCSATR12S4
- ASI: 52623
- SED: SII-SCSATR12S
- Dell Harmony: A1157748
|
|
|
|
|
|