SIIG’s HDMI1.3 over 1-Cat5e Extender is designed to enable high definition content transmission up to 200ft via a single Cat5e/6 cable.  This extender kit is capable of delivering full HD 1080p video and uncompressed 7.1-channel digital sound to display unit in distance over a cost-effective CAT5e/6 cable. It works with ranges of HDMI video resolutions from 480i to 1080p and multiple high bit rate audio formats include DTS-HD and Dolby True HD.  To further prevent any possible distortion through transmission, an 8-level equalization control switch is available on receiver unit providing necessary adjustment if picture or image is skewed. It is one of the simplest solutions to connect a remote display without complicated installation setup.
 
The HDMI1.3 over 1-Cat5e Extender is FCC & CE regulatory approved and backed by SIIG’s 3-year warranty.

• Extends video/audio transmission from an HDMI source to an HDMI display over one economical CAT5e/6 cable
• Minimize cable skew with the adjustable 8-level equalization knob
• Supports uncompressed 7.1 digital & DTS-HD and Dolby True HD high bit rate audio
• Compatible with DVI monitors
• Complete kit with transmitter and receiver unit

• HDMI 1.3c compliant & HDCP compatible
• Chipset: Silicon Image
• Video bandwidth: 10.2 Gbps (single-link 340MHz)
• Input TMDS signal: 1.2 Volts (peak to peak)
• Input DDC signal: 5 Volts (peak to peak)
• Video support: 480i / 480p / 720p / 1080i / 1080p (60Hz)
• Transmission:
• 720p/1080i (HD): 165ft (CAT5e) & 200ft (CAT6)
• 1080p (full HD): 130ft (CAT5e) & 165ft (CAT6)
• Transmitter:
• Input: 1x HDMI
• Output: 1x RJ-45
• Receiver:
• Input: 1x RJ-45
• Output: 1x HDMI
• Power supply: 5V, 4A DC
• Power consumption: 1 Watt (max
• Housing: metal (for better RF shielding)
• Warranty: 3 years
  

• HDMI 1.3 CAT5e Transmitter
• HDMI 1.3 CAT5e Receiver
• Power adapter (5V, 4A)
• Screw kit
  
• User's manual

• Ingram Micro: BD2003
• Tech Data: 10537664
• D&H: CEH20F11S1
• ASI: 83923
• Synnex: 2704119