USB 3.1 to SATA 2.5 External Hard Drive Enclosure

JU-SA0Q12-S1

Easily add more storage space to your USB 3.1 10Gbps enabled system

USB 3.1 to SATA 2.5 External Hard Drive Enclosure
  • Quickly adds external storage device via USB connection (USB 3.1 10Gbps recommended)
  • Fits 7mm, 9.5mm, and 12.5mm height 2.5" SATA HDD and SATA SSD up to 8TB storage capacity
  • Supports plug-n-play, hot-swappable, and backwards compatible with USB 1.1 / 2.0 / 3.0
  • SuperSpeed USB 3.1 Gen 2 supports data transfer rate up to 10Gbps (up to 2 times faster than USB 3.0)
  • Compatible with SATA 1/2/3 and supports SATA bandwidth up to 6Gbps
  • Delicate and lightweight aluminum housing design further assists heat-dissipation for long life and stable operation
  • LED indicator displays the bus power or working status
  • No driver installation required, simply install a 2.5" SATA hard disk into the enclosure then connect it to a USB port
  • Two screws sliding enclosure design allows quick and secure installation
  • Included USB Y-split (data and power) cable supplies additional power to your storage device as needed
View all features

Quantity in stock: 340

$49.99


Description

SIIG’s USB 3.1 to SATA 2.5 External Hard Drive Enclosure is a cutting-edge product designed to enable SATA 2.5” hard disk drives to work with your USB 3.1 10Gbps enabled desktop or notebook computer.  This slim and portable enclosure instantly adds extra storage space of up to 8TB in capacity to your system, delivers maximum data transfer rates of up to 10Gb/s (up to 2 times faster than USB 3.0), and allows you to hot-swap the enclosure (connect and disconnect) without first turning your system off.  This USB 3.1 10Gbps enclosure is super easy to set up, no driver installation is required, and is an excellent mobile storage solution for transferring large volumes of data at high speed between your external SATA hard disk drive and the computer.  Simply install your 2.5” SATA hard disk drive into the USB 3.1 enclosure and experience the speed of USB 3.1 technology.

Features

  • Quickly adds external storage device via USB connection (USB 3.1 10Gbps recommended)
  • Fits 7mm, 9.5mm, and 12.5mm height 2.5" SATA HDD and SATA SSD up to 8TB storage capacity
  • Supports plug-n-play, hot-swappable, and backwards compatible with USB 1.1 / 2.0 / 3.0
  • SuperSpeed USB 3.1 Gen 2 supports data transfer rate up to 10Gbps (up to 2 times faster than USB 3.0)
  • Compatible with SATA 1/2/3 and supports SATA bandwidth up to 6Gbps
  • Delicate and lightweight aluminum housing design further assists heat-dissipation for long life and stable operation
  • LED indicator displays the bus power or working status
  • No driver installation required, simply install a 2.5" SATA hard disk into the enclosure then connect it to a USB port
  • Two screws sliding enclosure design allows quick and secure installation
  • Included USB Y-split (data and power) cable supplies additional power to your storage device as needed

Specifications

  • Chipset: ASMedia ASM1351
  • Compliant with Universal Serial Bus 3.1 specification
  • Compliant with Serial ATA Specification 3.2
  • Serial ATA bus up to 6Gbps signal bandwidth
  • Supports USB 3.1 data transfer rate up to 10Gbps*
    *Note:
    For maximum data throughput, use a SATA 6Gb/s hard disk with the enclosure and connect to a USB 3.1 10Gbps port.  Data throughput is dependent on system hardware and may be less.
  • Supports up to 8TB hard disk capacity**
    **Note: 
    Windows 2000, XP (32-bit), Server 2003 (32-bit) can't support more than 2TB capacity.  This is an OS limitation.
  • Supports USB Mass Storage Class Bulk-Only Transport
  • Support Spread Spectrum Control of USB 3.1 and SATA interface to improve the EMI performance
  • Product:
    • Dimensions: 4.81" (W) x 3.06" (H) x 0.63" (D)
    • Weight: 0.11 lbs
    • Color: Black/Red
  • Connector:
    • 1 x 9-pin, USB 3.1 Type A, Female
    • Serial ATA data (7-pin) and power (15-pin), Internal
  • USB 3.1 cable:
    • 1 x 9-pin, USB 3.1 Type A, Male
    • 1 x 4-pin, USB Type A, Male, Power
    • 1 x 9-pin, USB 3.1 Type A, Male
  • Environmental conditions:
    • Operating temperature: 32 to 122 degrees F
    • Storage temperature: 14 to 140 degrees F
    • Relative humidity: 5% to 90% RH (non condensing)
  • Certifications/Standards: FCC, CE, RoHS
  • Warranty: 1 year limited
  • Country of origin: China

Requirements

  • Desktop or notebook PC with an available USB 3.1/3.0/2.0 port (USB 3.1 10Gbps port recommended)
  • Windows® 8 (32-/64-bit) / 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit)
  • Windows Server 2003 & 2008 (32-/64-bit) / 2008 R2 / 2012 / 2012 R2
  • Mac OS® X v10.6.x or later

Package Contents

  • USB 3.1 to SATA 2.5 External Hard Drive Enclosure
  • USB 3.1 Y-split (data and power) cable
  • Installation kit
  • Installation guide

Channel Product Codes

  • Ingram Micro: 1E7665
  • Tech Data: 11825699
  • D&H: JUSA0Q12S1
  • ASI: 172104
  • Synnex: 4255066