Serial ATA 4-channel RAID

Double click on above image to view full picture

Zoom Out
Zoom In


  • Serial ATA 4-channel RAID
  • Serial ATA 4-channel RAID - right view

Serial ATA 4-channel RAID


Quantity in stock: 181


+ Add to Wishlist + Add to Compare


High-speed 4-channel PCI-to-Serial ATA RAID controller


SIIG’s Serial ATA 4-Channel RAID host adapter is an ideal solution for expanding your SATA storage capacity to your desktop computer. It is designed to add four SATA channels for connecting up to four additional SATA hard disk drives. This Serial ATA RAID host adapter can be configured as a standard 4 channel host controller or with RAID 0 (striping), RAID 1 (mirroring) or RAID 10 (mirror + striping) for performance, reliability or both respectively. Additionally, it can be used as a boot or secondary controller and will co-exist with most existing on-board Ultra ATA controllers.

The Serial ATA 4-Channel RAID host adapter comes with four thin, flexible Serial ATA cables, two dual connector SATA power cable, two Y-split power cables, a driver CD and a comprehensive user’s manual for a no-hassle installation.  It is fully compatible with a wide variety of Windows operating systems and is backed by SIIG’s limited lifetime warranty.


  • Supports RAID 0 (striping), RAID 1 (mirroring) and RAID 10 (mirror + striping) for performance and reliability
  • Thin, flexible Serial ATA cables make it easier to route inside a PC
  • Breaks the 137GB barrier! Supports various brands of large capacity Serial ATA hard drives
  • Lower pin count and voltage requirement, plus better cabling over traditional Parallel ATA make Serial ATA the controller of the future
  • Four high quality SATA cables and two dual connector SATA power cables required for RAID configuration are included
  • Two “Y” split power cables are also included to provide extra power connection


  • Chipset: Silicon Image SiI3114
  • Port type: Four Serial ATA ports
  • Slot type: 32-bit PCI
  • Compliant with Serial ATA Specification, revision 1.0
  • Compliant with PCI Specification, revision 2.2
  • Supports 48-bit LBA and verified to work with up to 4TB drives
  • Supports RAID 0 (striping), RAID 1 (mirroring) and RAID 10 (mirror + striping)
  • Coexists with Ultra ATA controller and allows you to connect up to four Serial ATA drives
  • Features independent 256-byte FIFOs per channel for host reads and writes
  • Features Watch Dog timer for fault resiliency and flash memory for future BIOS updates
  • Supports 32-bit wide PCI bus at 66MHz
  • Supports data transfer rates up to 150 MB/s (1.5Gb/s)
  • Environmental conditions:
    • Operating temperature: 32 to 122 degrees F
    • Operating humidity: 20% to 80% RH
    • Storage temperature: -4 to 140 degrees F
    • Storage humidity: 10% to 90% RH
  • Certifications/Standards: FCC, CE, RoHS
  • Warranty: Lifetime limited
  • Country of origin: China


  • Pentium or equivalent PC with one available PCI slot
  • Windows® 8 (32-/64-bit) / 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000

Package Contents

  • Serial ATA 4-channel RAID
  • 4 Serial ATA data cables
  • 2 Dual-connector SATA power cables
  • 2 "Y" split power cables
  • Driver and utility software CD
  • Quick installation guide

Channel Product Codes

  • Ingram Micro: K52099
  • Tech Data: 10538033
  • D&H: SCSA4R12S2
  • ASI: 51862
  • Dell: A0771409
  • Synnex: 2727972