Serial ATA PCI RAID

Double click on above image to view full picture

Zoom Out
Zoom In

MORE VIEWS

  • Serial ATA PCI RAID
  • Cable Details

Serial ATA PCI RAID

SC-SATR12-S4

Availability: In stock

$59.99


+ Add to Wishlist + Add to Compare

Description

High-speed dual-channel PCI-to-Serial ATA RAID controller

Overview

SIIG’s Serial ATA PCI RAID controller card is an ideal solution to expand your SATA storage capacity on your desktop computer. It is designed to co-exist with on-board controllers, and add two internal ultra high speed SATA channels for connecting up to two SATA hard disk drives. The Serial ATA PCI RAID controller delivers data transfer rates of up to 1.5Gb/s, and supports RAID 0 (striping) for performance and RAID 1 (mirror) for data reliability. It features two independent 256-byte FIFOs channels for host reads and writes, watch dog timer for fault resiliency and flash memory for future BIOS updates. It is an excellent controller card to work with various brands of hard disk drives with capacities up to 2TB.

The 2-channel Serial ATA PCI RAID controller card is powered by Silicon Image chip and is fully compliant with industry standards, including Serial ATA Specification, Revision 1.0 and PCI Specification, Revision 2.2. It is also FCC Class B (DoC) & CE regulatory approved and RoHS-compliant.

The Serial ATA PCI RAID controller comes with two thin, flexible Serial ATA cables for user-friendly installation and better air circulation, a dual-connector SATA power cable, a “Y” split power cable, a driver and utility software CD and a comprehensive user’s manual. It is fully compatible with a wide variety of Windows operating systems and is backed by SIIG’s limited lifetime warranty.

Features

  • Supports RAID 0 (striping) for performance and RAID 1 (mirroring) for reliability
  • The thin, flexible Serial ATA cable is easier to route inside a PC
  • Breaks the 137 GB barrier! Supports various brands of large capacity Serial ATA hard disk drives

Specifications

  • Regulatory approval(s): FCC Class B (DoC) & CE
  • RoHS-compliant
  • Chipset: Silicon Image Sil3512
  • Port type: Two Serial ATA ports
  • Slot type: 32-bit PCI
  • Compliant with Serial ATA Specification, revision 1.0
  • Compliant with PCI Specification, revision 2.2
  • Supports RAID 0 (striping) for performance and RAID 1 (mirroring) for reliability
  • Coexists with Ultra ATA controller and allows you to connect up to two Serial ATA hard disks
  • Features independent 256-byte FIFOs per channel for host reads and writes
  • Features Watch Dog timer for fault resiliency and flash memory for future BIOS updates
  • Supports 32-bit wide PCI bus at 66MHz data transfer rates up to 150 MB/s (1.5 Gb/s)
  • Lower pin count and voltage requirement, plus better cabling over traditional Parallel ATA make Serial ATA the controller of the future
  • Breaks the 137 GB barrier! Supports various brands of large capacity Serial ATA hard disk drives
  • Two high quality SATA cables and 15-pin SATA power cables required for RAID configuration are included. One "Y" split power cable is also included to provide extra power connection!
  • Country of origin: China

Requirements

  • Pentiumr or equivalent PC with one available PCI slot
  • Windowsr 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000 / ME / 98SE

Package Contents

  • Serial ATA PCI RAID
  • Two Serial ATA cables
  • Dual-connector SATA power cable
  • "Y" split power cable
  • Driver and utility software
  • User's manual

Channel Product Codes

  • Ingram Micro: K79026
  • Tech Data: 87872C
  • D&H: SCSATR12S4
  • ASI: 52623
  • Dell: A1157748
  • SED: SII-SASATR12S
  • Synnex: 2727981