Legacy & Beyond SATA 6Gb/s 3i+1 SSD Hybrid PCIe

SC-SA0T11-S1

PCI Express (PCIe) SATA 6Gbps Adapter with SSD Socket

SATA 6Gb/s 3i+1 SSD Hybrid PCIe
  • Built-in socket for a 2.5” SATA SSD for space saving and superior drive performance
  • Hybrid (HyperDuo) enables 80% of SSD performance at one-third the cost
    Note: HyperDuo automatic storage tiering is only compatible with Windows XP, Vista, 7 and 8.  This feature is not fully supported in the Server OSes
  • Hardware RAID (RAID 0, 1 & 10) to offload the host CPU for max performance
  • Supports Port Multiplier FIS-based and Native Command Queuing (NCQ)
    Note: Only one Port Multiplier is supported at any one time. Supports up to 4 drives connected via Port Multiplier plus 3 single drives for 7 drives total
  • Supports TRIM to extend the life of SSDs for maximum durability
  • HyperDuo mode supports Safe mode and Capacity mode
  • 48-bit LBA mode with support up to 4TB hard disk capacity
  • Works with the latest 6Gb/s SATA HDDs and backwards compatible with 3Gb/s and 1.5Gb/s HDDs
View all features

Quantity in stock: 182

$109.99


Description

SIIG’s SATA 6Gb/s 3i+1 SSD Hybrid PCIe adds 3 internal SATA 6Gb/s channels and 1 SATA SSD socket to your PCIe-equipped system.  It is embedded with the fully-automated HyperDuo technology to enable SSD performance at 1/3 of the cost to work flawlessly with the leading 6Gb/s HDDs.  This cost-effective hardware RAID (RAID 0, 1, 10) SATA host controller significantly enhances system performance by the capability of SSD acceleration to reduce system boot-up time and allows data to be stored on the high capacity of HDD data storage for cost saving.

Features

  • Built-in socket for a 2.5” SATA SSD for space saving and superior drive performance
  • Hybrid (HyperDuo) enables 80% of SSD performance at one-third the cost
    Note: HyperDuo automatic storage tiering is only compatible with Windows XP, Vista, 7 and 8.  This feature is not fully supported in the Server OSes
  • Hardware RAID (RAID 0, 1 & 10) to offload the host CPU for max performance
  • Supports Port Multiplier FIS-based and Native Command Queuing (NCQ)
    Note: Only one Port Multiplier is supported at any one time. Supports up to 4 drives connected via Port Multiplier plus 3 single drives for 7 drives total
  • Supports TRIM to extend the life of SSDs for maximum durability
  • HyperDuo mode supports Safe mode and Capacity mode
  • 48-bit LBA mode with support up to 4TB hard disk capacity
  • Works with the latest 6Gb/s SATA HDDs and backwards compatible with 3Gb/s and 1.5Gb/s HDDs

Specifications

  • Chipset: Marvell 88SE9230
  • Compliant with Serial ATA specification, Revision 3.0
  • Compliant with PCI Express Base specification, Revision 2.0
  • Supports 6Gb/s data transfer rate
  • Supports hardware RAID (RAID 0, 1, 10)
  • Input Interface: x2 PCI Express Generation 2
  • Output Interface: SATA
  • Connector:
    • 3x 7-pin, SATA, Output
    • 1x SSD Socket, 15+7-pin, SATA, Output
  • Product:
    • Dimensions: 5.83" (W) x 0.79" (H) x 4.72" (D)
    • Weight: 0.17lbs
  • Environmental conditions:
    • Operating temperature: 32 to 131 degrees F (0 to 55 C)
    • Storage temperature: 14 to 158 degrees F (-10 to 70 C)
    • Humidity: 20% to 80% RH (non-condensing)
  • SATA data cable length: 19.5" (0.5 m)
  • Certifications/Standards: FCC, CE, RoHS
  • Warranty: 5 years limited
  • Country of origin: China

Requirements

  • Desktop PC with an available x2, x4, x8 or x16 PCIe slot
  • Windows® 10 (32-/64-bit) / 8 (32-/64-bit) / 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / Server 2008 R2

Package Contents

  • SATA 6Gb/s 3i+1 SSD Hybrid PCIe
  • SATA data cables (2)
  • Screws (4)
  • Driver/software CD
  • Installation guide

Channel Product Codes

  • Ingram Micro: TF3479
  • Tech Data: 11218244
  • ASI: 142777