CyberSerial Dual+DOS

JJ-P02D11-S6

Availability: In stock

$59.99

Qty:

+ Add to Wishlist + Add to Compare

Description

2-port serial (16550), built-in 32-byte FIFO buffers to work in 32-/64-bit, 3.3V/5V PCI and PCI-X slots

Overview

SIIG’s CyberSerial Dual+DOS serial adapter is an excellent solution for you to connect more serial-based devices to your system. It is designed to add two 9-pin (DB9) serial ports to your current PCI-enabled desktop computer. This 2-port serial adapter card comes with two high-speed 16550 UART DB9 serial ports supporting data transfer rates of up to 230Kb/s. The serial ports can work as either standard DB9 RS232 ports, or can be configured for 5V /12V power output for serial devices that require power such as handheld scanners, table scanners, and POS displays.

The CyberSerial Dual+DOS adapter supports IRQ sharing to reduce IRQ conflicts, built-in 32-byte FIFO buffers to dramatically increase data transmit/receive speed especially under Windows multitasking environment, and PME (Power Management Event) that allows device to request a change in system power state (wake up system). Additionally, this serial adapter features a 4-layer PCB (with separate layers for data and ground) to greatly reduce signal noise and loss, and an enhanced bend-resistant bracket to provide a more secure connection to the system. It is the fast and reliable solution to connect a wide variety of serial port devices such as 56K V.90 external modems, ISDN terminal adapters, PDAs, digital cameras, label printers and more. SIIG’s CyberSerial Dual+DOS adapter is powered by SIIG CyberPro chipset, conforms to PCI v2.2 universal card standard, is also FCC Class B (DoC) & CE regulatory approved and RoHS-compliant. The CyberSerial Dual+DOS is fully compatible with a wide variety of Windows operating systems and is backed by SIIG’s limited lifetime warranty.

Features

Supports 32-/64-bit, 3.3V/5V PCI and PCI-X slots
Two high-speed 16550 UART serial ports (9-pin) support data rate up to 230 Kbps
Will work as standard RS232 port or with 5V or 12V power output for devices that require power (such as handheld scanners, table scanners, POS displays, etc.). Configurable via jumpers with silk-screened settings on PCB

Specifications

Regulatory approval(s): FCC Class B (DoC) & CE
RoHS-compliant
Chip: CyberPro
Bus type: 32-bit PCI
Port type: Two 9-pin RS232 serial port
IRQ sharing reduces IRQ conflicts
Built-in 32-byte FIFO buffers dramatically increase data transmit/receive speed, especially under Windows multitasking environment
4-layer PCB board: separate layers for data & grounding. Greatly reduces signal noise & loss. Delivers more reliable high-speed data transfers
Enhanced bracket design to prevent bending. Connected to PCB with washered screws for a more secure connection
Supports 3.3V operation with 5V tolerance
Conforms to PCI v2.2 universal card standard. PCI-X & 64-bit compatible
Supports PME # (Power Management Event). Allows device to request a change in system power state (wake up system)
Use SMT (Surface Mount Technology) type electrolytic capacitor. Low ESR (Equivalent Series Resistance) aluminum electrolytic capacitor. Offers much improved noise suppression & achieves higher levels of performance/reliability
Use SMT (Surface Mount Technology) type crystal. Offers cleaner design than traditional DIP-type crystal. Provides greatly improved grounding, which reduces EMI emission & improves performance/reliability

Requirements

Pentiumr or equivalent computer with an available 32-/64-bit PCI or PCI-X slot
Windows^r 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000 / NT 4.0 / ME / 98SE / 98 / 95
Linux Kernel 2.4.x or later