CyberSerial Dual

Double click on above image to view full picture

Zoom Out
Zoom In

MORE VIEWS

  • CyberSerial Dual

CyberSerial Dual

JJ-P02012-S6

Availability: In stock

$59.99


+ Add to Wishlist + Add to Compare

Description

Dual-port serial (16550), built-in 32-byte FIFO buffers to work in 32-/64-bit, 3.3V/5V PCI and PCI-X slots

Overview

SIIG’s CyberSerial Dual is designed to provide you with two additional 9-pin (DB9) serial ports to your desktop computer for more serial-based device connections. This 2-port serial adapter card comes with two high-speed 16550 UART serial ports supporting data transfer rate of up to 230Kb/s. The serial ports can work as either standard RS232 ports, or with 5V /12V power outputs for devices that require power such as handheld scanners, table scanners, and POS displays.

Additional features of this CyberSerial Dual adapter card include IRQ sharing to reduce IRQ conflicts, built-in 32-byte FIFO buffers to dramatically increase data transmit/receive speed especially under Windows multitasking environment, and PME (Power Management Event) that allows device to request a change in system power state (wake up system).

SIIG’s CyberSerial Dual adapter is powered by Oxford chip and conforms to PCI v2.2 universal card standard. It is also FCC Class B (DoC) & CE regulatory approved and RoHS-compliant. The CyberSerial Dual is fully compatible with a wide variety of Windows operating systems and is backed by SIIG’s limited lifetime warranty.

Features

  • Supports 32-/64-bit, 3.3V/5V PCI and PCI-X slots
  • Two high-speed 16550 UART serial ports (9-pin) support data rate up to 230 Kbps
  • Will work as standard RS232 port or with 5V or 12V power output for devices that require power (such as handheld scanners, table scanners, POS displays, etc.). Configurable via jumpers with silk-screened settings on PCB

Specifications

  • Regulatory approval(s): FCC Class B (DoC) & CE
  • RoHS compliant
  • Chip: CyberPro
  • Bus type: 32-bit PCI
  • Port type: Two 9-pin RS232 serial ports
  • IRQ sharing reduces IRQ conflicts
  • Built-in 32-byte FIFO buffers dramatically increase data transmit/receive speed, especially under Windows multitasking environment
  • 4-layer PCB board: separate layers for data & grounding. Greatly reduces signal noise & loss. Delivers more reliable high-speed data transfers
  • Enhanced bracket design to prevent bending. Connected to PCB with washered screws for a more secure connection
  • Supports 3.3V operation with 5V tolerance
  • Conforms to PCI v2.2 universal card standard. PCI-X & 64-bit compatible
  • Supports PME # (Power Management Event). Allows device to request a change in system power state (wake up system)
  • Use SMT (Surface Mount Technology) type electrolytic capacitor. Low ESR (Equivalent Series Resistance) aluminum electrolytic capacitor. Offers much improved noise suppression & achieves higher levels of performance and reliability
  • Use SMT (Surface Mount Technology) type crystal. Offers cleaner design than traditional DIP-type crystal. Provides greatly improved grounding, which reduces EMI emission & improves performance and reliability
  • Country of origin: Taiwan

Requirements

  • Pentiumr or equivalent computer with an available 32-/64-bit PCI or PCI-X slot
  • Windowsr 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000 / NT 4.0 / ME / 98SE / 98 / 95

Package Contents

  • CyberSerial Dual card
  • Driver CD
  • Installation guide

Channel Product Codes

  • Ingram Micro: K23861
  • Tech Data: 14895D
  • D&H: JJP02012S6
  • ASI: 50802
  • Dell: A0812809
  • SED: SII-JJP02012S
  • Synnex: 2727927