DP CyberSerial 4S PCIe

JJ-E40011-S3

Availability: In stock

$109.99

Qty:

+ Add to Wishlist + Add to Compare

Description

Four 9-pin serial (16950 UART) x1 PCI Express card

Overview

SIIG’s DP CyberSerial 4S PCIe is designed to provide four additional 9-pin serial ports to your PCI Express-enabled desktop computer for more serial-based device connections. This 4-port serial PCIe adapter card comes with four high-speed 16950 UART serial ports supporting asynchronous baud rates of up to 15Mb/s. Its built-in 128-byte FIFO buffers dramatically increase data transmit and receive speeds especially under Windows multitasking environment. The serial ports can work as either standard RS232 ports, or with 5V / 12V power outputs via an onboard power connector for devices that require power, such as serial handheld scanners, POS displays, remote monitors, barcode readers, receipt printers, RFID transceivers, and blood-pressure meters.

The DP CyberSerial 4S PCIe features a unique and space saving 4-port fan-out cable which gives the DP CyberSerial 4S PCIe card additional routing flexibility to your serial devices. This 4-port serial adapter works with PCI Express slot with different lane widths and its dual-profile PCB design along with the included spare low profile bracket allows it to be installed in either standard height & low profile desktop system.

SIIG’s DP CyberSerial 4S PCIe adapter is powered by Oxford chip and conforms to PCI Express Base Specification, Revision 1.1. It is also FCC Class B (DoC) & CE regulatory approved and RoHS compliant. The DP CyberSerial 4S PCIe is fully compatible with a wide variety of Windows operating systems and is backed by SIIG’s limited lifetime warranty.

Features

PCI Express 1-lane (x1) adapter works with PCI Express slots with different lane width
Installs in any available PCI Express slot
Four high-speed 16950 UART serial ports (9-pin) support asynchronous baud rates up to 15 Mbps
Works as standard RS232 port or with 5V or 12V power output for devices that require power (such as handheld scanners, table scanners, POS displays, etc.). Configurable via jumpers with silk-screened settings on PCB
Spare enhanced low profile bracket is included to work in low profile chassis

Specifications

Regulatory approval(s): FCC Class B (DoC) & CE
RoHS-compliant
Chipset: SIIG CyberPro, V3.0 (Oxford OxPCIe954)
Bus type: PCI Express x1
Port type: Four 9-pin RS232 serial ports (via 4-port fan out cable)
Compliant with PCI Express Base Specification, Revision 1.1
Built-in 128-byte FIFO buffers dramatically increase data transmit/receive speed, especially under Windows multitasking environment
Asynchronous baud rates up to 15 Mbps
4-layer PCB board: separate layers for data & grounding. Greatly reduces signal noise & loss. Delivers more reliable high-speed data transfers
Enhanced bracket design to prevent bending. Connected to PCB with washered screws for a more secure connection
Onboard power connector to provide reliable power source for devices that require power
Board dimensions:
- With full size bracket: 3.75" (W) x 4.75" (H) x 0.875" (D)
- With low-profile bracket: 3.75" (W) x 3.25" (H) x 0.875" (D)
4-Port Fan-out cable:
- Length: 18 inches
- Connectors:
  - DFP-36-pin (male) input
  - 4x DB-9 (female) output

Requirements

PCI Express-enabled system with an available PCI Express slot
Windows^r 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000