1x8 HDMI Splitter, Over IP Extender Kit, 1080p 60Hz, 120m

  • HDMI over HDbitT
  • IP Extender
  • 1 to 8
  • 394ft/120m
  • HDCP 1.2
  • One to Many
  • Many to Many
  • VLAN Supports Multicast
  • Cat5e/6
  • 1080p@60Hz
  • IR Extension
  • Reset Button
In stock
Quantity in stock: 43
SKU
CE-H26W11-S1
$779.99

We ship all orders within 1 business day

Lifetime technical support on all of our products

45-day return window and money-back guarantee



    Overview

    Extends 1080p HDMI signal up to 394ft over Cat6 cable to up to 8 displays, IR control, works with Gigabit network switches for more displays and extension

    overview


    Features

    Extend HDMI audio and video signals up to 394ft (120m) via Cat5e/6 cable for remote display/monitor using best network transport protocol and IR remote control of source devices

    many


    What is HDbitT?
    HDbitT is a new generation audio/video digital connection transmission protocol solution. Provides stable performance, long-distance transmission, and high-definition signal

    hdbit


    Extend Distance
    This 1x8 HDMI Splitter HDbitT over IP Extender is designed for transmission/security, up to 394ft (120m) per each HDMI signal through HDbitT protocol and Gigabit Ethernet switch to the remote HDMI displays

    dis


    High Performance
    Offers a true 10.2Gbps video bandwidth and supports stereo audio

    bandw


    resFull HD Resolution
    Supports high-definition video resolution up to 1080p (1920x1080) @60Hz, HDCP 1.2 to deliver a clear picture quality


    IR Extension
    IR pass-through feature allows remote control of the HDMI source device and playback function at the remote display


    Highly Scalable
    Works as a scalable TX/RX matrix over the dedicated IP network and allows up to 256 total units, and extends/splits HDMI signals to multiple displays. The additional receiver unit (part#- CE-H26U11-S1) is sold separately

    *Note: IGMP Gigabit Switch is recommended for best performance and reliability

    many

    multi

    VLAN setup supported
    Create a separate VLAN for each TX and its corresponding RX’s

    *Note:
    - Each VLAN can only accommodate 1 transmitter (TX)
    - We recommend using SIIG's 24-port AV Over IP Smart Ethernet Switch (part# CE-SW0111-S1), sold separately


    Multiple Connectivity Ports
    Comes with one HDMI video input port, eight HDMI output ports, eight RJ45 network input ports, eight RJ45 network output ports, one 3.5mm IR emitter port, eight 3.5mm IR receiver port, five reset buttons, one DC power jacks (12V/3A, for TX only), eight DC power jack (5V/1A, for RX)

    tx

    rx

    Connection

    conn


    Maximum Compatibility
    Supports Plug-n-play. No driver installation required
    The reset button allows displays to be re-detected if no displays are detected


    Metal Housing Design
    Protects the inside PCBA, also enhance the heat dissipation for better performance. Military-grade component for long service life


Applications

    • Video conference room
    • Show room
    • Digital signage
    • Broadcasting
    • Airport
    • Control center
    • Classroom
    • Dental office
    • Hospitality
    • Supermarket
    • Shopping center
    • Sport bar
    • Restaurant
    • Retail
    • Trade show
    • Church
    • Security center
    • Surveillance control center

    Need to Know Before Buying

    1. Please confirm your computer or device with HDMI port

    computer

    2. Check the extended displays/monitors with HDMI port and support 1080p@60Hz resolution

    monitor

    3. Please ensure using UTP Cat5e or Cat6 cable for the best video quality and accurate transmission distance

    4. IGMP Switch or Managed Ethernet Switch is recommended for the best performance and reliability


    Specifications

    Video
    HDMI 1x input, 8x output
    Resolution 1080p/1080i/720p/480i/480p @60Hz
    Transport protocol
    HDbitT protocol Audio/video digital connection transmission protocol
    Audio
    Stereo audio from HDMI, support 192Kbps bit rate
    IR pass-through
    Allows remote control of the HDMI source device and playback function at the remote display
    Full frequency: 20KHz to 60KHz
    Power
    Power adapter Input: 100-240V/50-60Hz, Output: DC 12V/3A (TX); DC 5V/1A (RX)
    UL listed E335801/Level: VI
    Environmental conditions
    Operating temperature 32 to 122 degrees F
    Storage temperature 14 to 158 degrees F
    Relative humidity 0% to 90% RH (non-condensing)
    Product Info
    Transmitter unit (TX) Dimensions: 11.81” (L) x 1.18” (H) x 4.37" (W)
    Weight: 1.81lbs
    Color: black
    Housing material: metal
    (Housing with wall mount design)
    Receiver unit (RX) Dimensions: 3.81” (L) x 0.93” (H) x 3.70" (W)
    Weight: 0.33lbs
    Color: black
    Housing material: metal
    (Housing with wall mount design)
    Unit package
    Dimensions 18.11” (L) x 6.30” (H) x 10.24" (W)
    Weight 9.49 lbs
    Certifications/Standards
    FCC, CE, RoHS, REACH
    Warranty: 2 years limited
    Country of origin: China

    Interface

    interface

    1x Transmitter unit (TX):

    • 1x 19-pin, HDMI, Female (input)
    • 1x 3.5mm infrared jack, IR emitter (output)
    • 8x 8-pin, RJ45 (output)
    • 1x Reset button
    • 1x DC power jack, 12V/3A

    rx

    8x Receiver unit (RX):

    • 8x 19-pin, HDMI, Female (output)
    • 8x 3.5mm infrared jack, IR receiver (input)
    • 8x 8-pin, RJ45 (input)
    • 8x Reset button
    • 8x DC power jack, 5V/1A


    Package contents

    • 1x 1x8 HDMI Splitter HDbitT Over IP Extender- 120m
    • 1x 3.5mm IR emitter extension cable
    • 8x 3.5mm IR receiver extension cable
    • 1x DC power adapter (12V/3A)- for TX
    • 8x DC power adapter (5V/1A)- for RX
    • 1x User Reference Guide

Manuals

Frequently Asked Questions (Q&A)

Q: Can this extend to 8 different screens?

No, it can not extend to 8 different screens. All splitter outputs will always have the same screens

Q: Why the Over IP extender video can not cross the Router?

The Over IP extender are using Multicast Protocol, please check do the Switch and Router can support Multicast packet pass through

Please note that you must be logged in to submit questions.