Skip to the beginning of the images gallery

HDMI 4K HDR 1x4 Splitter HDBaseT Extender with Auto-scaling

Extends HDMI signals to four HDMI Receivers over CAT5e/6 cable up to 198ft (1080p@60Hz) or 114ft (4K@60Hz) with resolution auto-scaling, IR control, and Power over Cable support. TAA compliant

In stock

Quantity in stock: 4

SKU

CE-H24N11-S1

$1,499.99

Overview

Features Features Extends Full HD 1080p HDMI signals up to 198ft (60m) and 4K@60Hz signals up to 114ft (35m) over CAT5e/6 cable Supports 4K@60Hz YUV 4:4:4 8-bit, 4K@60Hz HDR YUV 4:2:0 10-bit Supports PoC (Power over Cable) technology which allows the transmitter and receiver unit(s) to be powered by only one power supply connected to the transmitter unit Transmitter unit supports two HDMI loop-outs for addition local display connections Receiver unit supports 2 HDMI outputs for more display connections Note: Additional Receiver (part# CE-H24P11-S1) sold separately. Supports EDID management for increased device compatibility Supports resolution auto-down scaling from 4K to 1080p allowing displays of different capabilities to be connected simultaneously Pure unaltered uncompressed 7.1ch digital HDMI over CAT5e/6 cable transmission offers the best audio signal DTS-HD Master Audio and Dolby TrueHD high bit rate audio for true sound compatibility Supports full bi-directional IR pass-through signal from 30KHz to 56KHz frequency *Notes: Below are limitations associated with 4K content down scaling: - Down scaling to 720p and 480p is not supported - YUV 4:2:2 down scaling is not supported - Frame rate conversion (e.g., 60Hz to 24Hz) is not supported - 4K@30Hz monitors will display in 1080p@60Hz when the source content is 4K@60Hz - The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally

Specifications

System Requirements Package Contents Specifications Video bandwidth: Single-link 600MHz (18Gbps) Video support: HDR 4Kx2K @60Hz (4:2:0 10-bit) / 4Kx2K @60Hz (4:4:4 8-bit) Resolution up to 3840x2160 @60Hz HDCP Compliance: HDCP bypass Auto equalization Bi-directional IR pass-through RS-232 Pass-thru: Up to 115,200bps Product: Transmitting unit (TX): Dimensions: 12.8" (L) x 0.98" (H) x 5.83" (W) Weight: 3.06 lbs Connectors: 1x 19-pin HDMI, Type A, Female, Input 1x 3.5mm jack, IR, Input/ 1x 3.5mm jack, IR, Output 1x Power jack 4x 8-pin, RJ45, HDMI signal, Output 2x 19-pin HDMI, Type A, Female, Loop-out 1x Dip Switch, EDID management 1x RS-232, Input/Output Micro-USB, Firmware update Receiving unit (RX): Dimensions: 5.47" (L) x 0.75" (H) x 2.76" (W) Weight: 0.39 lbs Connectors: 1x 8-pin, RJ45, HDMI signal, input 1x 3.5mm jack, IR, Input/ 1x 3.5mm jack, IR, Output 1x RS-232, Input/Output 1x 3-Pin dip Switch, EDID management 2x 19-pin HDMI, Type A, Female, Output Housing material: Metal ESD protection: Human body model — ±15kV (air-gap) & ±8kV (contact) Supported Cable Length (CAT5): 1080p@60Hz: 198ft (60m) 4K@60Hz: 114ft (35m) Unit Package: Dimensions: 20.67" (W) x 2.95" (H) x 10.43" (D) Weight: 6.94 lbs Power adapter: Input: 100-240VAC, 50/60 Hz Output DC12V/7.5A UL:E163743 Class:VI Environmental conditions: Operating temperature: 32 to 104°F (0 to 40°C) Storage temperature: -4 to 140°F (-20 to 60°C) Relative humidity: 20~90% RH [no condensation] Certifications/Standards: FCC, CE, RoHS TAA Compliant Warranty: 3 years limited Country of origin: Taiwan Notes: Below are limitations associated with 4K content down scaling: - Down scaling to 720p and 480p is not supported - YUV 4:2:2 down scaling is not supported - Frame rate conversion (e.g., 60Hz to 24Hz) is not supported - 4K@30Hz monitors will display in 1080p@60Hz when the source content is 4K@60Hz - The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally System Requirements HDMI source device such as computers, game consoles, Blu-ray/DVDplayers, and media players HDMI displays, monitors, and HD TVs Notes: Below are limitations associated with 4K content down scaling: - Down scaling to 720p and 480p is not supported - YUV 4:2:2 down scaling is not supported - Frame rate conversion (e.g., 60Hz to 24Hz) is not supported - 4K@30Hz monitors will display in 1080p@60Hz when the source content is 4K@60Hz - The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally Package contents HDMI 4K HDR 1x4 Splitter HDBaseT Extender (1 Transmitter, 3 Receivers) * Additional Receiver unit (part# CE-H24P11-S1) sold separately Power adapter DC 12V / 7.5A x1 IR blaster (1pc) IR Receiver (3pcs) Terminal block (4pcs) Mounting kit (Screw kit:4x20 mm 8pcs, Mounting ears 6pcs, Screw kit: 3x4 mm 12pcs) Rubber pad (4pcs) User Manual

Downloads

Q&A (2)

Frequently Asked Questions (Q&A)

Q: Can this extend to 4 different screens?

No, it can not extend to 4 different screens. All splitter outputs will always have the same screens

Q: I have a setup issue when I connect the different TVs that are playing the same content but no sound. What should I do?

Please change the audio output format to PCM or change the EDID of the Splitter to 2 channel, because the TVs or displays cannot decode the audio. * Don't use bitstream or digital format

Please note that you must be logged in to submit questions.

HDMI 4K HDR 1x4 Splitter HDBaseT Extender with Auto-scaling

Features

Specifications

System Requirements

Package contents

Manuals

Frequently Asked Questions (Q&A)

About SIIG

IT Products

AV Products

Company Info