1x4 HDMI Splitter, Over IP Extender Kit, 1080p 60Hz, 120m

Features

• With a single Cat6 cable, you can easily extend HDMI audio/video signals up to 394ft (120m) with our 1x4 HDMI Splitter HDbitT over IP Extender Kit - 120m. Direct 1-to-1 connection, 1-to-Many through Gigabit network switches. Additional receivers, part# CE-H26U11-S1), are sold separately
• Features cascade connection of up to 30 receivers per transmitter. 1-to-many configuration through 1) Unmanaged/Dedicated Gigabit switches, 2) Smart Gigabit switches with VLAN to segregate video traffic from the rest of the LAN. Many-to-many configuration is also supported via VLAN setups. Note that each VLAN can only accommodate 1 transmitter (TX). Note: We recommend using SIIG's 24-port AV Over IP Smart Ethernet Switch, part# CE-SW0111-S1, sold separately
• Delivers crystal clear Full HD content up to [email protected] resolution. Supports up to 1080p; supports 408i/480p @60Hz, 576i/576p @50Hz, 720p @50/60Hz, 1080i/1080p @50/60Hz; Auto adjustment for different cable lengths to produce the best video/audio experience. Supports 2-channel Stereo Audio. * Note: There’s a 250ms or less delay/latency due to data compression. Not recommended for real-time applications, such as PC gaming
• IR remote control through Cat6 cable allow source device to recognize remote commands; You can control the HDMI source device at a secondary location with the included IR cables that forward commands over a Cat6 cable for convenience. We recommend using high performance pure COPPER Cat6 cables to ensure reliable performance
• High quality durable surface mountable metal housing with ventilation panels provides excellent heat dissipation and a higher level of RF/EMI shielding to ensure reliable performance and system stability during long hours of non-stop operation
• Plug-n-Play installation, no software installation required, backed by a 2-year limited warranty

Note: Replaces CE-H25F11-S1

Specifications

• Transport protocol: HDbitT
• Compliant with HDCP 1.2
• Transmission distance: Up to 394ft (120m) via single Cat6 cable at [email protected] resolution
• Video resolution: 480p / 720p / 1080i / [email protected]
• Audio input: 7.1 Channel, PCM, DTS, AC3 audio
• IR signal: Unidirectional full frequency 20KHz to 60KHz
• Housing: Aluminum wall mount design
• Network cable: UTP/STP CAT6/6a/7, solid copper
• Connection topology:
  
  • Direct connection: 1x4
  • Cascade: 1-to-many through dedicated IGMP Gigabit switches, up to 30 receivers per TX
• Product:
  
  • Transmitting unit (TX):
    
    • Dimensions: 9.92" (L) x 0.98" (H) x 3.82" (W)
    • Weight: 1.34 lbs
    • Connectors:
      
      • 1x 19-pin HDMI, Type A, Female, Input
      • 1x 3.5mm jack, IR blaster, Output
      • 4x 8-pin, RJ45, HDbitT signal, Output
      • 1x Power jack, 5V/2A, Input
      • 1x Reset button
  • Receiving unit (RX):
    
    • Dimensions : 3.81" (L) x 0.93" (H) x 3.70" (W)
    • Weight: 0.33 lbs
    • Connectors:
      
      • 1x 19-pin HDMI, Type A, Female, Output
      • 1x 3.5mm jack, IR receiver, Input
      • 1x 8-pin, RJ45, HDbitT signal, Input
      • 1x Power jack, 5V/1A, Input
      • 1x Reset button
  • Unit Package:
    
    • Dimensions: 14.49" (W) x 2.44" (H) x 8.46" (D)
    • Weight: 5.51 lbs
• Power adapter:
  
  • Input: 100-240V / 50-60Hz
  • TX: DC 5V/2A
  • RX: DC 5V/1A
  • UL listed: E335801 / Level: VI
• Environmental conditions:
  
  • Operating temperature: 32 to 122 degrees F
  • Storage temperature: 14 to 158 degrees F
  • Relative humidity: 0 to 90% RH (non-condensing)
• Certifications/Standards: FCC, CE, RoHS
• Warranty: 2 years limited
• Country of origin: China

System Requirements

• Cat6/6a/7 cable with T568B wiring standard (solid copper wire recommended)
• HDMI displays and cables
• Unmanaged dedicated IGMP Gigabit network routers or switches (for cascade connection)
• HDMI HDbitT Over IP Extender with IR - Receiver, part# CE-H26U11-S1, sold separately to add more displays via cascade connection

Package contents

• 1x4 HDMI Splitter HDbitT over IP Extender - 120m (1 TX + 4 RXs)
• Power adapter (5pcs):
  
  • 5V/2A (1pc)
  • 5V/1A (4pcs)
• IR Blaster cable (1pc)
• IR Receiver cable (4pcs)
• Quick Start Guide