1x8 HDMI Splitter HDbitT over IP Extender - 120m

• Extends HDMI signals up to 120m (394ft) over economical Cat6 cabling to up to 8 displays
• Features Cascade connection extends HDMI signal through unmanaged Gigabit network routers or switches. With HDBitT® transport protocol, you can not only extend but split HDMI signals to additional displays
  
  • Note: Additional receivers, HDMI Extender over CAT6 with IR - Receiver, part # CE-H24U11-S1, sold separately
• Delivers crystal clear Full HD content up to [email protected] resolution
• IR remote control through Cat6 cable allows you to control the HDMI source device at the remote display location
• High quality durable metal housing with ventilation panels provides excellent heat dissipation to ensure reliable performance and system stability during long hours of operation
• Plug-n-Play installation, no software installation required

• Transport protocol: HDbitT
• Transmission distance: Up to 120m (394ft) via single Cat6 cable at 1080p 60Hz
• Audio: 7.1 channel, PCM, DTS, AC3 audio
• Full frequency IR signal from 20KHz to 60KHz
• Video resolution: 480p / 720p / 1080i / [email protected]
• Product housing: TX Metal and RX Aluminum with wall mount design
• Network cable: UTP/STP Cat6/6a/7
• Connection methods:
  
  • 1x4: Direct connection
  • Cascade: 1-to-Multiple through IGMP Gigabit network routers or switches
• Product:
  • Transmitting unit (TX):
    • Dimensions: 11.81" (L) x 1.18" (H) x 4.37" (W)
    • Weight: 1.83 lbs
    • Connectors:
      • 1x 19-pin HDMI, Type A, Female, Input
      • 1x 3.5mm jack, IR, Output
      • 8x 8-pin, RJ45, HDbitT signal, Output
      • 1x Power jack, 5V/2A
      • 1x Reset button
  • Receiving unit (RX):
    • Dimensions: 3.81" (L) x 0.93" (H) x 3.70" (W)
    • Weight: 0.33 lbs
    • Connectors:
      • 1x 19-pin HDMI, Type A, Female, Output
      • 1x 3.5mm jack, IR, Input
      • 1x 8-pin, RJ45, HDbitT signal, Input
      • 1x Power jack, 5V/1A
      • 1x Reset button
• Power adapter:
  • Input: 100-240V / 50-60Hz
  • TX: DC 5V/2A
  • RX: DC 5V/1A
  • UL listed: E335801 / Level: VI
• Environmental conditions:
  • Operating temperature: 32 to 122 degrees F
  • Storage temperature: 14 to 158 degrees F
  • Relative humidity: 0 to 90% RH (non-condensing)
• Certifications/Standards: FCC, CE, RoHS
• Warranty: 2 years limited
• Country of origin: China

Requirements

• Cat6/6a/7 cable using T568B wiring standard
  
  • 100% copper wire recommended for best performance
• HDMI displays and cables
• Dedicated IGMP Gigabit network routers or switches (for Cascade connection)

Package Contents

• 1x8 HDMI Splitter HDbitT over IP Extender - 120m (1 TX & 8 RXs)
• Power adapter (9pcs)
• IR Blaster extension cable (1pc)
• IR Receiver extension cable (8pcs)
• Screw kit
• Quick Start Guide