Specifications
- HDMI Compliance: HDMI 2.0a
- Video bandwidth: Single-link 600MHz (18Gbps)
- Video support: HDR 4Kx2K @60Hz (4:2:0 10-bit) / 4Kx2K @60Hz (4:4:4 8-bit)
- Resolution up to 3840x2160 @60Hz
- HDCP Compliance: HDCP bypass
- Auto equalization
- Bi-directional IR pass-through
- RS-232 Pass-thru: Up to 115,200bps
- Product:
- Transmitting unit (TX):
- Dimensions: 12.8" (L) x 0.98" (H) x 5.83" (W)
- Weight: 3.06 lbs
- Connectors:
- 1x 19-pin HDMI, Type A, Female, Input
- 1x 3.5mm jack, IR, Input/ 1x 3.5mm jack, IR, Output
- 1x Power jack
- 4x 8-pin, RJ45, HDMI signal, Output
- 2x 19-pin HDMI, Type A, Female, Loop-out
- 1x Dip Switch, EDID management
- 1x RS-232, Input/Output
- Micro-USB, Firmware update
- Receiving unit (RX):
- Dimensions: 5.47" (L) x 0.75" (H) x 2.76" (W)
- Weight: 0.39 lbs
- Connectors:
- 1x 8-pin, RJ45, HDMI signal, input
- 1x 3.5mm jack, IR, Input/ 1x 3.5mm jack, IR, Output
- 1x RS-232, Input/Output
- 1x 3-Pin dip Switch, EDID management
- 2x 19-pin HDMI, Type A, Female, Output
- Housing material: Metal
- ESD protection: Human body model — ±15kV (air-gap) & ±8kV (contact)
- Supported Cable Length (CAT5):
- Power adapter:
- Input: 100-240VAC, 50/60 Hz
- Output DC12V/7.5A
- UL:E163743 Class:VI
- Environmental conditions:
- Operating temperature: 32 to 104°F (0 to 40°C)
- Storage temperature: -4 to 140°F (-20 to 60°C)
- Relative humidity: 20~90% RH [no condensation]
- Certifications/Standards: FCC, CE, RoHS
- TAA Compliant
- Warranty: 3 years limited
- Country of origin: Taiwan
*Notes:Below are limitations associated with 4K content down scaling: - Down scaling to 720p and 480p is not supported - YUV 4:2:2 down scaling is not supported - Frame rate conversion (e.g., 60Hz to 24Hz) is not supported - [email protected] monitors will display in [email protected] when the source content is [email protected] - The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally
System Requirements
- HDMI source device such as computers, game consoles, Blu-ray/DVDplayers, and media players
- HDMI displays, monitors, and HD TVs
*Notes:
Below are limitations associated with 4K content down scaling: - Down scaling to 720p and 480p is not supported - YUV 4:2:2 down scaling is not supported - Frame rate conversion (e.g., 60Hz to 24Hz) is not supported - [email protected] monitors will display in [email protected] when the source content is [email protected] - The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally
Package contents
- HDMI 2.0 4K HDR 1x4 Splitter HDBaseT Extender (1 Transmitter, 3 Receivers)
- Additional Receiver unit (part# CE-H24P11-S1) sold separately
- Power adapter DC 12V / 7.5A x1
- IR blaster (1pc)
- IR Receiver (3pcs)
- Terminal block (4pcs)
- Mounting kit (Screw kit:4x20 mm 8pcs, Mounting ears 6pcs, Screw kit: 3x4 mm 12pcs)
- Rubber pad (4pcs)
- User Manual
|