HDMI 4K30Hz HDbitT over IP Extender - 120m - Encode and Decode for One to One / One to Many / Many to Many - IR Control - Reset key

  • HDMI over HDbitT
  • IP Extender
  • 394ft/120m
  • 4K30Hz
  • HDCP 1.4
  • Cat6/7
  • One to Many
  • IR Extension
  • VLAN Supports Multicast
  • Reset Button
In stock
Quantity in stock: 8
SKU
CE-H25D11-S2
$229.99

We ship all orders within 1 business day

Lifetime technical support on all of our products

45-day return window and money-back guarantee



    Overview

    Extends HDMI audio/video signals using existing network equipmentup to 120m over cost effective Cat 6/7 cable, while maintaining signal strength and superior audio/video quality, 4K30Hz, HDCP 1.4, One to One, One to Many, Many to Many, IR Control

    overview


    Features

    fea

    Transmits HDMI audio and video signals to a remote display/monitor over UTP Cat6/7 cable up to 394ft (120m) and sends the 4K HD resolution to the receiver for stable transmission and cost saving. Allows multiple receivers to be used simultaneously in multiple configurations

    overview2


    What is HDbitT?

    HDbitT is a new generation audio/video digital connection transmission protocol solution. Provides stable performance, long-distance transmission, and high-definition signal

    hdbit


    Extend Distance

    This HDMI 4K30Hz HDbitT over IP Extender designed for transmission/security, HDMI signals up to 394ft (120m) through HDbitT protocol and Gigabit Ethernet switch to a remote HDMI display

    dist


    Highly Scalable

    Works as a scalable TX/RX matrix over the dedicated IP network and extends/splits HDMI signals to multiple displays. Allows up to 255 total RX units, the additional receiver unit (part#- CE-H25E11-S2) is sold separately

    *Note: IGMP Gigabit Switch is recommended for best performance and reliability

    one

    many

    mul

    VLAN setup supported

    Create a separate VLAN for each TX and its corresponding RX’s


    res

    4K HD Resolution

    Supports high-definition video resolution up to 4K (3840x2160) @30Hz, HDCP 1.4 to deliver a crystal-clear picture quality


    IR Extension

    IR pass-through feature allows remote control of the HDMI source device and playback function at the remote display


    High Performance

    Offers a true 10.2Gbps video bandwidth and supports stereo audio

    band


    Multiple Connectivity Ports

    Comes with HDMI video input port, one HDMI output port, two RJ45 network ports, one 3.5mm IR emitter port, one 3.5mm IR receiver port, two reset buttons, two DC power jacks (5V/2A)

    ports

    Connection

    conn


    Maximum Compatibility

    Supports Plug-n-play. No driver installation required The reset button allows displays to be re-detected if no displays are detected


    Metal Housing Design

    Protects the inside PCBA, also enhance the heat dissipation for better performance. Military-grade component for long service life


Applications

    overview2


    • Digital signage• Broadcasting• Video conference room• Show room• Classroom• Dental office
    • Hospitality• Supermarket• Shopping center• Sport bar• Restaurant• Retail
    • Trade show• Church• Airport• Control center• Security center• Surveillance control center

    Need to Know Before Buying

    1. Please confirm your computer or device with HDMI port

    computer

    2. Check the extended display/monitor with HDMI port and supports 4K@30Hz resolution

    monitor

    3. Please ensure using UTP Cat6 or Cat7 cable for the best video quality and accurate transmission distance

    4. IGMP Switch or Managed Ethernet Switch is recommended for the best performance and reliability

    5. The receiver (CE-H25E11-S2) is only for CE-H25D11-S2 and CE-H25D11-S1 is replayed by part# CE-H25D11-S2


    Specifications

    Video
    HDMI 1x input, 1x output
    Resolution 4K@30Hz, 1080p/1080i/720p/480i/480p@60Hz
    Transport protocol
    HDbitT protocol Audio/video digital connection transmission protocol
    Audio
    Stereo audio from HDMI, support 192Kbps bit rate
    IR pass-through
    Allows remote control of the HDMI source device and playback function at the remote display
    Full frequency 20KHz to 60KHz
    Power
    Power adapter Input: 100-240V/50-60Hz, Output: DC 5V/2A
    UL listed E335801/Level: VI
    Environmental conditions
    Operating temperature 32 to 122 degrees F
    Storage temperature 14 to 158 degrees F
    Relative humidity 0% to 90% RH (non-condensing)
    Product Info
    Transmitter unit (TX) Dimensions: 4.22” (L) x 0.93” (H) x 3.70" (W)
    Weight: 0.37lbs
    Color: black
    Housing material: metal (Housing with wall mount design)
    Receiver unit (RX) Dimensions: 4.22” (L) x 0.93” (H) x 3.70" (W)
    Weight: 0.37lbs
    Color: black
    Housing material: metal (Housing with wall mount design)
    Unit package
    Dimensions 7.83” (L) x 3.15” (H) x 5.87" (W)
    Weight 1.62 lbs
    Certifications/Standards
    FCC, CE, RoHS, REACH
    Warranty: 2 years limited
    Country of origin: China

    Interface

    interface

    Transmitter unit (TX):

    • 1x 19-pin, HDMI, Female (input)
    • 1x 3.5mm infrared jack, IR emitter (output)
    • 1x 8-pin, RJ45 (output)
    • 1x Reset button
    • 1x DC power jack, 5V/2A

    Receiver unit (RX):

    • 1x 19-pin, HDMI, Female (output)
    • 1x 3.5mm infrared jack, IR receiver (input)
    • 1x 8-pin, RJ45 (input)
    • 1x Reset button
    • 1x DC power jack, 5V/2A


    Package contents

    • 1x HDMI 4K30Hz HDbitT Over IP Extender - 120m
    • 1x 3.5mm IR emitter extension cable
    • 1x 3.5mm IR receiver extension cable
    • 2x DC power adapter (5V/2A)
    • 1x User reference guide

Manuals

04-1396a.pdf Download manual

Frequently Asked Questions (Q&A)

Q: Why the Over IP extender video can not cross the Router?

The Over IP extender are using Multicast Protocol, please check do the Switch and Router can support Multicast packet pass through

Please note that you must be logged in to submit questions.