Serial ATA 4-channel RAID

Features

• Supports RAID 0 (striping), RAID 1 (mirroring) and RAID 10 (mirror + striping) for performance and reliability
• Thin, flexible Serial ATA cables make it easier to route inside a PC
• Breaks the 137GB barrier! Supports various brands of large capacity Serial ATA hard drives
• Lower pin count and voltage requirement, plus better cabling over traditional Parallel ATA make Serial ATA the controller of the future
• Four high quality SATA cables and two dual connector SATA power cables required for RAID configuration are included
• Two “Y” split power cables are also included to provide extra power connection

Specifications

• Chipset: Silicon Image SiI3114
• Port type: Four Serial ATA ports
• Slot type: 32-bit PCI
• Compliant with Serial ATA Specification, revision 1.0
• Compliant with PCI Specification, revision 2.2
• Supports 48-bit LBA and verified to work with up to 4TB drives
• Supports RAID 0 (striping), RAID 1 (mirroring) and RAID 10 (mirror + striping)
• Coexists with Ultra ATA controller and allows you to connect up to four Serial ATA drives
• Features independent 256-byte FIFOs per channel for host reads and writes
• Features Watch Dog timer for fault resiliency and flash memory for future BIOS updates
• Supports 32-bit wide PCI bus at 66MHz
• Supports data transfer rates up to 150 MB/s (1.5Gb/s)
• Environmental conditions:
  
  • Operating temperature: 32 to 122 degrees F
  • Operating humidity: 20% to 80% RH
  • Storage temperature: -4 to 140 degrees F
  • Storage humidity: 10% to 90% RH
• Certifications/Standards: FCC, CE, RoHS
• Warranty: Lifetime limited
• Country of origin: China

System Requirements

Package contents

• Serial ATA 4-channel RAID
• 4 Serial ATA data cables
• 2 Dual-connector SATA power cables
• 2 "Y" split power cables
• Driver and utility software CD
• Installation guide