Serial ATA 4-Channel PCI

Double click on above image to view full picture

Zoom Out
Zoom In

MORE VIEWS

  • Serial ATA 4-Channel PCI
  • Serial ATA 4-Channel PCI - right view
  • Serial ATA data cables (1 meter)
  • Dual-connector Serial ATA power cable

Serial ATA 4-Channel PCI

SC-SA4011-S2

Quantity in stock: 28

$69.99


+ Add to Wishlist + Add to Compare

Description

High-speed 4-channel Serial ATA host adapter

Overview

SIIG’s Serial ATA 4-Channel PCI host adapter is an ideal solution for expanding your SATA storage capacity to your desktop computer. It is designed to add four SATA channels for connecting up to four additional SATA hard disk drives. This Serial ATA host adapter delivers data transfer rates of up to 1.5Gb/s and breaks the barrier to support hard disk drives larger than 137GB. It comes with two independent bus master DMA channels with 256-byte FIFOs per channel for host reads and writes and flash memory BIOS making future upgrades possible. It can be configured as a boot or secondary controller and co-exists with on-board Ultra ATA controllers.

The Serial ATA 4-Channel PCI host adapter comes with two thin, flexible Serial ATA cables, a dual connector SATA power cable, a driver CD and a comprehensive user’s manual for a no-hassle installation. It is fully compatible with a wide variety of Windows operating systems and is backed by SIIG’s limited lifetime warranty.

Features

  • Supports up to four Serial ATA hard disk drives with high-speed data transfer rates up to 150MB/sec
  • The thin, flexible Serial ATA cable is easier to route inside a PC
  • Breaks the 137GB barrier! Supports various brands of large capacity Serial ATA hard disk drives
  • Coexists with Ultra ATA controller and allows you to connect up to four Serial ATA hard disks
  • High quality SATA cable and 15-pin SATA power cable required for SATA hard disk installation are included!
  • Lower pin count and voltage requirement, plus better cabling over traditional Parallel ATA make Serial ATA the controller of the future
  • Features Watch Dog timer for fault resiliency and flash memory for future BIOS updates

Specifications

  • Chipset: Silicon Image SiI3114
  • Port type: Four Serial ATA ports
  • Slot type: 32-bit PCI
  • Compliant with Serial ATA Specification, revision 1.0
  • Compliant with PCI Specification, revision 2.2
  • Supports 32-bit wide PCI bus at 66MHz
  • Works in both 32-bit or 64-bit PCI slots
  • Data transfer rates up to 150 MB/s (1.5Gb/s)
  • Supports 48-bit LBA and verified to work with up to 4TB drives
  • Features independent 256-byte FIFOs per channel for host reads and writes
  • Environmental conditions:
    • Operating temperature: 32 to 122 degrees F
    • Storage temperature: -4 to 140 degrees F
    • Operating humidity: 20% to 80% RH
    • Storage humidity: 10% to 90% RH
  • Certifications/Standards: FCC, CE, RoHS
  • Warranty: Lifetime limited
  • Country of origin: China

Requirements

  • Pentium® or equivalent PC with an available PCI slot
  • Windows® 8 (32-/64-bit) / 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000 / NT4.0 / ME / 98SE

Package Contents

  • Serial ATA 4-channel PCI board
  • (2) Serial ATA data cables (1 meter)
  • Dual-connector Serial ATA power cable
  • Driver CD
  • User's manual

Channel Product Codes

  • Ingram Micro: K37135
  • Tech Data: 10538032
  • D&H: SCSA4011S2
  • ASI: 52289
  • Dell: A2290093
  • Synnex: 2727971