4K HDR HDMI 2.0 & USB 2.0 Extender Over HDBaseT with RS-232 & IR

• Extends HDMI 2.0 audio and video signal from your HDMI source to a remote HDMI display up to 330ft (100m) away at Full HD 1080p, or 230ft (70m) at [email protected] (4:4:4 8bit/HDR10 4:2:0 10bit) through a single premium quality CAT5e/6 cable
• Delivers crystal clear picture quality with resolution up to 3840x2160 @60Hz YUV 4:4:4 8bit and HDR 3840x2160 @60Hz YUV 4:2:0 10bit
• Pure unaltered uncompressed 7.1ch digital HDMI over CAT cable transmission, DTS-HD Master Audio and Dolby TrueHD high bit rate audio support
• Supports USB 2.0 data transmission between the receiver and transmitter
• Supports PoC (Power over Cable) technology which allows both the transmitter and receiver units to be powered through only one power adapter
• Supports ARC on the receiver unit
• Bi-directional IR sensors allow you to remotely control the HDMI source device from the remote display side or control the remote display from the source device side
• High quality metal housing with cooling slots provide excellent ESD and electromagnetic protection plus excellent heat dissipation and cooling for stable operation during extended hours of use
• Slim profile design easily adopts into versatile application environment, wall mountable housing for easy and varied installation requirements

Note: Does not support connecting to Router or Switch

• Compliant with HDMI 2.0 and HDCP 2.2
• Supports EDID pass through, CEC, Deep Color
• Supports [email protected] YUV 4:4:4 8bit
• Supports [email protected] HDR YUV 4:2:0 10bit
• Video bandwidth up to 18Gbps (600MHz per channel)
• Video latency: <20µs
• Auto skew equalization
• Full Duplex RS-232 control up to 115200 bps through connector
• Full Duplex USB 2.0 data transmission up to 480Mbps
• Audio support: DTS-HD Master Audio and Dolby True HD
• Bi-directional IR pass-through supports full frequency IR signal from 20KHz to 60KHz
• Power consumption: 18 watts (max)
• ESD protection: ±15kV Air & ±8kV Contact
• Resolution: 480p / 720p / 1080i / 1080p / [email protected] YUV 4:4:4 8bit / HDR [email protected] YUV 4:2:0 10bit
• Supports PoC (Power over Cable) technology which allows both the transmitter and receiver units to be powered through one power adapter connected to either unit
• Aluminum housing with wall mount design
• Transmission protocol: HDBaseT
  
  • Note: Does not support connecting to Router or Switch
• Transmission Distance:
  • 1080p @60Hz: up to 100m
  • 4K (3840x2160) @30Hz/60Hz: up to 70m
• Product:
  • Transmitting unit (TX):
    • Dimensions: 5.91" (L) x 0.79" (H) x 3.74" (W)
    • Weight: 0.84 lbs
    • Connectors:
      • 1x 19-pin HDMI, Type A, Female, Input
      • 1x 8-pin, RJ45, output
      • 1x 3.5mm jack, IR In
      • 1x 3.5mm jack, IR Out
      • 1x 3.5mm jack, Audio In
      • 1x 4-Pin, USB 2.0, Type-A, Female, USB Host
      • 1x 5-Pin, USB 2.0, Micro USB, Female, USB Device
      • 1x Power LED indicator
      • 1x 3-Pin, RS-232, Phoenix connector
      • 1x 3-Pin, DIP Switch
      • 1x Power jack
  • Receiving unit (RX):
    • Dimensions: 5.91" (L) x 0.79" (H) x 3.74" (W)
    • Weight: 0.90 lbs
    • Connectors:
      • 1x 19-pin HDMI, Type A, Female, Output
      • 1x 8-pin, RJ45, Input
      • 1x 3.5mm jack, IR In
      • 1x 3.5mm jack, IR Out
      • 1x 3.5mm jack, Audio Out
      • 1x Coaxial jack, S/PDIF Audio Out
      • 1x 4-Pin, USB 2.0, Type-A, Female, USB Host
      • 1x 5-Pin, USB 2.0, Micro USB, Female, USB Device
      • 1x Power LED indicator
      • 1x 3-Pin, RS-232, Phoenix connector
      • 1x 3-Pin, DIP Switch
      • 1x Power jack
• Power adapter:
  • Input: 100-240V / 50-60Hz
  • Output: DC 12V/2A
  • UL Listed: E163743 / Class VI
• Environmental conditions:
  • Operating temperature: 32 to 104 degrees F
  • Storage temperature: 14 to 158 degrees F
  • Relative humidity: 5% to 90% RH (non-condensing)
• Certifications/Standards: FCC, CE, RoHS
• TAA compliant
• Warranty: 3 years limited
• Country of origin: Taiwan

Package Contents

• 4K HDR HDMI 2.0 & USB 2.0 Extender Over HDBaseT with RS-232 & IR
  
  • Transmitter (TX) 1pc
  • Receiver (RX) 1pc
• Power adapter
• IR Blaster extension cable & IR Receiver extension cable
• Mounting ears (4) & Screw kit (8+4)
• Terminal Block (2)
• User Reference Guide