HDMI Over IP Extender Kit, IR Control, 4K30Hz, 120m

Extends HDMI audio/video signals over cost effective CAT6 cable, while maintaining signal strength and superior audio/video quality
Out of stock

We will send this product within 1 business day

Lifetime technical support on all of our product

45 day return and money back guarantee


    • With a single Cat6 cable, you can easily extend HDMI audio/video signals up to 394ft. Connect your HDMI source device (PC, Blu-ray player, media player) to the Transmitter, utilize existing Ethernet structure in your house/office to connect the transmitter to Receiver, then connect your HDTV from a remote location to the Receiver
    • Supports up to 4K @30Hz and 1080p. HDCP 2.2 compliant. Supports 2-channel Stereo Audio. Auto adjustment for different cable lengths to produce the best video/audio experience. We recommend using high performance pure copper Cat6 cables to ensure reliable performance
    • Direct 1-to-1 connection, 1-to-many through unmanaged Gigabit network switches, or many-to-many via VLAN through a Smart Ethernet Switch. With HDBitT transport protocol, you can connect up to 30 Receivers* per Transmitter to not only extend but split HDMI signals to multiple displays. *Additional Receivers (CE-H25E11-S1) are sold separately
    • One-directional IR control from RX side to TX side. Allows the source device to recognize remote commands from afar. You can control the HDMI source device at a remote location with the included IR cables that forward commands over a Cat6 cable
    • High quality surface mountable metal housing efficiently dissipates heat build-up, to ensure system stability and trouble-free operation


    • Transport protocol: HDbitT
    • Compliant with HDCP 2.2
    • Support connections:
      • Point to Point connection: up to 120m
      • One to many connection (dedicated unmanaged Gigabit network routers or switches recommended)
    • Transmission distance: Up to 394ft (120 meters)
    • 2-Channel PCM stereo audio
    • Full frequency IR signal from 20KHz to 60KHz
    • Resolution: 480p / 720p / 1080i / [email protected],[email protected]
    • Metal housing surface mountable
    • HDMI cable length: 10 meters (max), each input and output
    • Power consumption:
      • TX: 6 watts (max)
      • RX: 4 watts (max)
    • Product:
      • Transmitting unit (TX):
        • Dimensions: 4.45" (L) x 0.94" (H) x 3.70" (W)
        • Weight: 0.37 lbs
        • Connectors:
          • 1x 19-pin HDMI, Type A, Female, Input
          • 1x 3.5mm jack, IR Blaster
          • 1x 8-pin, RJ45, HDbitT signal output
          • 1x Reset button
          • 1x Power jack
      • Receiving unit (RX):
        • Dimensions : 4.45" (L) x 0.94" (H) x 3.70" (W)
        • Weight: 0.37 lbs
        • Connectors:
          • 1x 19-pin HDMI, Type A, Female, Output
          • 1x 3.5mm jack, IR Receiver
          • 1x 8-pin, RJ45, HDbitT signal input
          • 1x Reset button
          • 1x Power jack
    • Unit Package:
      • Dimensions: 7.83" (W) x 3.15" (H) x 5.87" (D)
      • Weight: 1.67 lbs
    • Power adapter:
      • Input: 100-240V / 50-60Hz
      • Output: DC 5V/2A
      • UL listed: E335801 / Level: VI
    • Environmental conditions:
      • Operating temperature: 32 to 122 degrees F
      • Storage temperature: 14 to 158 degrees F
      • Relative humidity: 0 to 90% RH (non-condensing)
    • Certifications/Standards: FCC, CE, RoHS
    • Warranty: 2 years limited
    • Country of origin: China

    System Requirements

    • HDMI source device and HDMI display
    • Cat6 cable (solid copper wire recommended)
    • Dedicated unmanaged Gigabit Ethernet Switch (for 1-to-many connection)
    • HDMI 4K30Hz HDbitT over IP Extender - Receiver, part # CE-H25E11-S1, sold separately. For network setup with multiple Receivers

    Package contents

    • HDMI 4K30Hz HDbitT over IP Extender - 120m
      • One Transmitter and One Receiver
    • Power adapters (2pcs)
    • IR Blaster cable (1pc)
    • IR Receiver cable (1pc)
    • Quick Start Guide


No Questions
Please note that you must be logged in to submit questions.