1x2 4K 60Hz HDMI Splitter Over Cat6 Extender with Loopout, IR, ARC & RS-232 - Up to 230ft (70m) - Near Zero Latency

• Features
• Applications
• Need to Know Before Buying

---

Overview

HDMI 1x2 Extender/Splitter, Extends 4K@60Hz HDMI signal to 2 displays up to 230ft (70m) over Cat6 cable, HDMI Loopout, IR Control, ARC, RS-232, Metal Housing, Wall mount design

---

Features

Simultaneously splits HDMI audio and video signals to two displays up to 230ft (70m) via Cat6/7 cable with zero latency, local display, audio extraction, ARC and IR remote control of HDMI devices



---

4K UHD Resolution

Supports Ultra high-definition video resolution up to 4K (3840x2160) @60Hz, HDR, HDCP 2.2, YUV 4:4:4 to deliver a crystal-clear picture quality
Allows EDID management via DIP switch to control remote/local displays resolution and RS-232 command control the device

---

Extend Distance

This 1x2 HDMI Splitter Over Cat6 Extender with Loopout designed to extends/splits HDMI signals up to 230ft (70m) through RJ45 network to two remote HDMI displays for reliability transmission
HDMI loop-out on the transmitter to connecting a local display for monitoring of the extended displays



---

IR Extension

Bi-directional IR remote control through Cat6/7 cable allows you to control the HDMI source device at the remote display location (IR blaster/receiver cables are included)
*Note: Please make sure the remote control is within the effective range



---

Audio Extraction

Easily extract audio via audio slid switch to select S/PDIF (Toslink) or ARC (Audio Return Channel) to return audio used to TV to the audio system/speaker
S/PDIF audio formats: PCM 2.0, Dolby 5.1, and DTS 5.1; HDMI audio formats: PCM 2.0/5.1/7.1, Dolby 5.1, and DTS 5.1



---

Multiple Connectivity Ports

Comes with one HDMI video input port, one HDMI video loop-out port, two HDMI video output ports, four RJ45 network ports, three 3.5mm IR emitter ports, three 3.5mm IR receiver ports, two S/PDIF ports, one RS-232 terminal block, one DIP switch, three reset buttons, two audio slide switches, one DC power jack (12V/2A) for TX, two DC power jacks (5V/2A) for RXs



Connection



---

Maximum Compatibility

Supports Plug-n-play. No driver installation required. The reset button allows displays to be re-detected if no displays are detected

---

Protection Components

Supports ESD protection, lightning protection, and surge protection to safe your electronic equipment

---

Metal Housing Design

Protects the inside PCBA, also enhance the heat dissipation for better performance. Military-grade component for long service life

---

Applications

• Lecture hall	• Exhibition	• Retail store	• Shopping center	• Restaurant
• Transportation	• Church	• Broadcast	• Educational facilities	• Show room
• Library	• Conference room

---

Need to Know Before Buying

1. Please confirm your computer or device with HDMI port



2. Check the extended and local displays/monitors with HDMI port and supports 4K@60Hz resolution

• Interface
• Package Contents

---

Specifications

Video
HDMI	1x input, 2x output
Resolution	HDCP 2.2, 4K (3840x2160)/1080p/1080i/720p/480i/480p @60Hz
Audio
7.1 channel surround sound from HDMI port, audio format PCM 2.0/5.1/7.1, Dolby 5.1, and DTS 5.1
5.1 channel surround sound from S/PDIF (Toslink) port, audio format: PCM 2.0, Dolby 5.1, and DTS 5.1
IR pass-through
Built-in Bi-directional IR remote control, allows you to control the HDMI source device at the remote display
Full frequency	20KHz to 60KHz
RS-232 Control
Supports up to 115200 baud rates. 3-pin: GND-RxD-TxD, follow RS-232 levels
Power
Power adapter	Input: 100-240V/50-60Hz, TX output: DC 12V/2A, RX output: DC 5V/2A
UL listed	E335801/Level: VI
Environmental conditions
Operating temperature	14 to 140 degrees F
Storage temperature	-4 to 158 degrees F
Relative humidity	0% to 90% RH (non-condensing)
Product Info
Transmitter unit (TX)	Dimensions: 10.43” (L) x 0.91” (H) x 4.09" (W) Weight: 1.46lbs Color: black Housing material: Metal
Receiver unit (RX)	Dimensions: 4.15” (L) x 0.79” (H) x 4.04" (W) Weight: 0.54lbs Color: black Housing material: Metal
Unit package
Dimensions	12.32” (L) x 3.35” (H) x10.83" (W)
Weight	4.56 lbs
Certifications/Standards
FCC, CE, RoHS, REACH
Warranty: 2 years limited
Country of origin: China

---

Interface



1x Transmitter (TX)
• 1x 19-pin, HDMI, Female (input)
• 1x 19-pin, HDMI, loop-out, Female (output)
• 1x 3.5mm infrared jack, IR emitter (output)
• 1x 3.5mm infrared jack, IR receiver (input)
• 2x 8-pin, RJ45 (output)
• 1x 3-pin, RS-232 terminal block (for control)
• 1x 4-pin, DIP switch (for EDID management)
• 1x Reset button
• 1x DC power jack, 12V/2A



2x Receivers (RX)
• 2x 19-pin, HDMI, Female (output)
• 2x 3.5mm infrared jack, IR emitter (output)
• 2x 3.5mm infrared jack, IR receiver (input)
• 2x 8-pin, RJ45 (input)
• 2x S/PDIF, Toslink digital audio (output)
• 2x Audio slide switch (S/PIDF and ARC)
• 2x Reset button
• 2x DC power jack, 5V/2A

---

Package contents

• 1x 1x2 HDMI Splitter Over Cat6 Extender with Loopout, IR, ARC & RS-232
• 1x 3.5mm IR emitter extension cable
• 2x 3.5mm IR receiver extension cable
• 1x DC power adapter, 12V/2A (for TX)
• 2x DC power adapter, 5V/2A (for RX)
• 1x RS-232 terminal block
• 1x Mounting kits
• 1x User Reference Guide