Full HD Wireless HDMI KVM Extender with Loopout, 1080p, up to 500ft (150m), HDMI Loop-out 4K60Hz

• Features
• Applications
• Need to Know Before Buying

---

Overview

Transmits 1080p HDMI signals wirelessly up to 500ft (150m) with IR control, keyboard, mouse and touch panel control, local HDMI loop-out 4K60Hz, HDCP 2.2/1.3, Dual Antenna, HDMI KVM Extender, Wireless HDMI Extender, Support Touch Panel

---

Features

Eliminate Cable Clutter and Reduce Installation Costs

Say goodbye to cable clutter and embrace wireless freedom, which eliminates the cost of installing an expensive wiring infrastructure



---

Wireless Long-distance Extended Performance

The device utilizes 2.4G/5G wireless technology to transmit HDMI and USB signals up to 500ft with near zero-latency in a line-of-sight environment, as well as an IR signal for controlling your source device remotely

*Note: The transmission distance will vary depending on building layout, electronic, interference, walls and partitions, other environmental conditions, and may be much less than the maximum

Dual Antenna Design, Powerful Signal Transmission

Dual 5dBi antenna with 2T2R data rate MIMO (Multiple-Input Multiple-Output) technology prevents signal interference and provides optimal reception quality

*Note: 2T2R (2 Transmitters and 2 receivers): supports fast upload and download speed



---

Full HD Resolution

The receiver unit flawlessly streams Full HD video at 1080p @60Hz and 2-ch R/L stereo audio. TX Compatible with HDCP 2.2, RX Compatible with HDCP 1.3

Enhanced Monitoring with HDMI Local Output

Witness pristine video quality with support for HDMI input and loopout up to 4K60Hz on the transmitter unit. With the HDMI loop-out feature, video monitoring becomes effortless, while the built-in IR signal extension allows you to control your playback devices remotely



---

Supports Multi-function USB Expansion and Touch Panel

Take control from a distance with USB extension capabilities. Connect a keyboard, mouse, or touch panel at the extended location to remotely operate your PC system, adding a new dimension to convenience *Note: If you need more USB ports, please use the included USB 2.0 hub



---

How to Pair the Transmitter and the Receiver

If the transmitter and receiver fail to pair automatically, refer to the instructions to pair both devices manually



---

Multiple Connectivity Ports

Transmitter:
Comes with two 5dBi antennas, one HDMI video input port, one HDMI loop-out, one 3.5mm IR blaster output port, one Micro USB 2.0 for PC USB host and one DC 5V/1A power jack

Receiver:
Comes with two 5dBi antennas, one HDMI video output, one USB Type-A for keyboard & mouse, one DC 5V/1A power jack





---

Plug-and-Play Convenience

No drivers required. Our HDMI extender is designed for simplicity. Just plug in and experience the convenience of wireless connectivity. The sturdy metal enclosure not only provides durability but also minimizes EMI/RFI noise interference for a smoother, uninterrupted experience

---

Applications

SIIG’s Full HD Wireless HDMI KVM Extender with Loopout can be used in a variety of applications where you need to extend the range of your HDMI signal and control multiple devices from a single keyboard and mouse or touch panel. Here are some specific examples:

• Meeting Rooms: Connect a conference table PC to a projector or large display in a meeting room without having to run long cables. This can make your meeting room setup more flexible and organized
• Home Theater: Extend the HDMI signal from your AV receiver to your projector or TV in a different room. This can be a great way to create a home theater setup without having to worry about running cables through walls or ceilings
• Digital Signage: Place your digital signage player in a remote location, such as a closet or control room, and extend the HDMI signal to a display up to 500 feet away. This can be helpful for retail stores, restaurants, and other businesses that want to keep their equipment out of sight

---

Need to Know Before Buying

1. When many networks are located closely together that will affect the wireless network. If you have multiple wireless networks in your home, please set the distance to 2 meters to avoid signal interference

2. When have walls or objects blocking the line of sight between transmitter and receiver, the signal will be significantly reduced

3. Different building materials will block the wireless signal, the most weakened by having to go through thick walls, especially reinforced concrete

4. Please confirm your computer with HDMI and USB 2.0 Type-A ports



5. Check the extended and local displays/monitors with HDMI port, if you are not sure, please check with the manual of the monitor



6. HDMI cable and Micro USB to USB-A cable are required to connect to the HDMI and USB host

7. Before using, please connect the two powers adapter to provide enough power

---

Comparison Table

	CE-H26G11-S2	CE-H27611-S1	CE-H26X11-S1	CE-H22G12-S1	CE-H23Q11-S1
Highest Resolution	1080p 60Hz/ 4K for Loop-out	1080p 60Hz	1080p 60Hz	1080p 60Hz	4K 30Hz
Max Distance	500ft	656ft	330ft	165ft	98ft
IR Pass-Through	✔	✔	✔	✔	✘
USB Signal Extension	✔	✘	✘	✘	✘
Multi-Channel Signal	✘	✔	✔	✘	✘
Multiple Receivers Supported	X	Up to 4 Receivers	X	X	X
HDMI Loop-out	✔	✔	✘	✘	✔

• Package Contents

---

Specifications

• HDCP version: TX: HDCP 2.2 compatible; RX: HDCP 1.3 compatible
• Supported Resolutions: HDMI Loopout: Up to 4K60Hz HDR; RX HDMI output: Up to 1080p 60Hz
• Wireless: IEEE 802.11b/g/n/ac, 2.4G/5GHz, 2T2R
• Transmission Distance: 150m (500ft) line-of-sight
  Note: The transmission distance will vary depending on building layout, electronic interference, walls and partitions, other environmental conditions, and may be much less than the maximum
• HDMI cable length: Up to 2m (Input & Output)
• Latency: About 100ms
• Audio format: PCM 2-channel stereo audio, 44.1KHz
• IR Remote Control: 20-60Hz Frequency Range
• Product
  • Color: Black
  • Housing: Metal
  • Transmitting unit (TX):
    • Dimensions: 6.18" (W) x 0.83" (H) x 3.15" (D)
    • Weight: 0.71 lbs
    • Connector:
      • 1x 19-pin HDMI, Female, Input
      • 1x 19-pin HDMI, Female, Loop Out
      • 1x 3.5mm IR jack (IR or reset button)
      • 1x 5-pin Micro USB for USB 2.0 Source
      • 1x 5-pin Micro USB for DC power input
      • 2x Antenna port
  • Receiving unit (RX):
    • Dimensions: 6.18" (W) x 0.83" (H) x 3.15" (D)
    • Weight: 0.71 lbs
    • Connector:
      • 1x 19-pin HDMI, Female, Output
      • 1x USB-A HID for Keyboard or Mouse or Touch Panel devices
      • 1x 5-pin Micro USB for DC power input
      • 2x Antenna port
• Unit package:
  • Dimensions: 10.04"(W) x 2.44"(H) x 9.25"(D)
  • Weight: 2.26 lbs
• Power Adapter
  • Input: AC 100-240V/50-60Hz
  • Output: DC 5V/1A
  • UL Listed: E336751/ Class: VI
• Environmental conditions:
  • Operating temperature: 32 to 104 degrees F
  • Storage temperature: 14 to 140 degrees F
  • Relative humidity: 10% to 80% RH (non-condensing)
• Certifications/Standards: FCC, CE, RoHS
• Warranty: 2 years limited
• Country of origin: Engineered in USA , Manufactured in China

---

Package contents

• 1x Full HD Wireless HDMI KVM Extender with Loopout- TX
• 1x Full HD Wireless HDMI KVM Extender with Loopout- RX
• 1x IR emitter cable (for TX)
• 2x Power adapter, 5V/1A
• 2x USB A to Micro USB power cable (150cm)
• 1x USB 2.0 hub (for KVM)
• 1x USB A to Micro USB cable (80cm, for USB 2.0 hub. * before using a USB 2.0 hub, please connect this cable)
• 1x User reference guide