HDMI 2.0 4K HDR 1x2 Splitter HDBaseT Extender with Auto-scaling

Extends HDMI signals to two HDMI displays over CAT5e/6 cable up to 198ft with resolution auto-scaling, IR control, and Power over Cable support
In stock
Quantity in stock: 34
SKU
CE-H24M11-S1
$799.99

We will send this product within 1 business day

Lifetime technical support on all of our product

45 day return and money back guarantee

    • Extends Full HD 1080p HDMI signals up to 198ft (60m) and [email protected] signals up to 114ft (35m) over CAT5e/6 cable
    • Supports [email protected] YUV 4:4:4 8-bit, [email protected] HDR YUV 4:2:0 10-bit
    • Supports PoC (Power over Cable) technology which allows the transmitter and receiver unit(s) to be powered by only one power supply connected to the transmitter unit
    • Supports two HDMI loop-outs for additional local display connections
    • Supports EDID management for increased device compatibility
    • Supports resolution auto-down scaling from 4K to 1080p allowing displays of different capabilities to be connected simultaneously
    • Pure unaltered uncompressed 7.1ch digital HDMI over CAT5e/6 cable transmission offers the best audio signal
    • DTS-HD Master Audio and Dolby TrueHD high bit rate audio for true sound compatibility
    • Supports bi-directional IR pass-through signal from 30KHz to 56KHz frequency
    *Notes:
    Below are limitations associated with 4K content down scaling:
       - Down scaling to 720p and 480p is not supported
       - YUV 4:2:2 down scaling is not supported
       - Frame rate conversion (e.g., 60Hz to 24Hz) is not supported
       - [email protected] monitors will display in [email protected] when the source content is [email protected]
       - The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally
    • HDMI compliance: HDMI 2.0a
    • Video bandwidth: Single-link 600MHz (18Gbps)
    • Video support: HDR [email protected] (4:2:0 10-bit) / [email protected] (4:4:4 8-bit)
    • Resolution up to 4K ([email protected])
    • HDCP compliance: HDCP pass through
    • Auto equalization
    • Bi-directional IR pass-through
    • RS-232 Pass-through: Up to 115,200bps
    • Product:
      • Transmitting unit (TX):
        • Dimensions: 9.29" (L) x 1.02" (H) x 4.6" (W)
        • Weight: 1.85 lbs
        • Connectors:
          • 1x 19-pin HDMI, Type A, Female, Input
          • 1x 3.5mm jack, IR, Input
          • 1x 3.5mm jack, IR, Output
          • 1x Power jack
          • 2x 8-pin, RJ45, HDMI signal, Output
          • 2x 19-pin HDMI, Type A, Female, Output
          • 1x 2-Pin Dip switch, Operating mode/Firmware update
          • 1x Rotary dial, EDID management
          • 1x RS-232, Input/Output
          • 1x Micro-USB, Firmware update
      • Receiving unit (RX):
        • Dimensions: 4.65" (L) x 0.63" (H) x 2.83" (W)
        • Weight: 0.33 lbs
        • Connectors:
          • 1x 8-pin, RJ45, HDMI signal, Input
          • 1x 3.5mm jack, IR, Input
          • 1x 3.5mm jack, IR, Output
          • 1x RS-232, Input/Output
          • 1x 1-Pin Dip switch, Operating mode/Firmware update
          • 1x 19-pin HDMI, Type A, Female, Output
    • Housing material: Metal
    • ESD protection:  Human body model -  ±15kV (air) & ±8kV (contact)
    • Transmission distance (CAT5e/6):
    • Power adapter:
      • Input: 100-240VAC, 50/60 Hz
      • Output: DC 12V/3.33A
      • UL: E161451
    • Environmental conditions:
      • Operating temperature: 32 to 104° F  (0 to 40° C)
      • Storage temperature: -4 to 140° F  (-20 to 60° C)
      • Relative humidity: 20 to 90% RH (non condensing)
    • Certifications/Standards:  FCC, CE, RoHS
    • TAA compliant
    • Warranty: 3 years limited
    • Country of origin: Taiwan
    *Notes:
    Below are limitations associated with 4K content down scaling:
       - Down scaling to 720p and 480p is not supported
       - YUV 4:2:2 down scaling is not supported
       - Frame rate conversion (e.g., 60Hz to 24Hz) is not supported
       - [email protected] monitors will display in [email protected] when the source content is [email protected]
       - The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally

    Requirements

    • HDMI source device such as computers, game consoles, Blu-ray/DVDplayers, and media players 
    • HDMI displays, monitors, and HD TV
    *Notes:
    Below are limitations associated with 4K content down scaling:
       - Down scaling to 720p and 480p is not supported
       - YUV 4:2:2 down scaling is not supported
       - Frame rate conversion (e.g., 60Hz to 24Hz) is not supported
       - [email protected] monitors will display in [email protected] when the source content is [email protected]
       - The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally

    Package Contents

    • HDMI 2.0 4K HDR 1x2 Splitter HDBaseT Extender (1 Transmitter, 2 Receivers)
    • Power adapter DC 12V / 3.3A
    • IR Blaster cable (1pc)
    • IR Receiver cable (2pcs)
    • Terminal block  (3pcs)
    • Mounting kit (Screw kit: 4x20 mm 6pcs, Mounting ears 4pcs, Screw kit: 3x4 mm 8pcs)
    • Rubber pad (4pcs)
    • User Manual

Downloads

No Questions
Please note that you must be logged in to submit questions.