HDMI 2.0 4K HDR 1x4 Splitter HDBaseT Extender with Auto-scaling

Extends HDMI signals to four HDMI Receivers over CAT5e/6 cable up to 198ft with resolution auto-scaling, IR control, and Power over Cable support
In stock
Quantity in stock: 14
SKU
CE-H24N11-S1
$1,499.99

We will send this product within 1 business day

Lifetime technical support on all of our product

45 day return and money back guarantee

    • Extends Full HD 1080p HDMI signals up to 198ft (60m) and [email protected] signals up to 114ft (35m) over CAT5e/6 cable
    • Supports [email protected] YUV 4:4:4 8-bit, [email protected] HDR YUV 4:2:0 10-bit
    • Supports PoC (Power over Cable) technology which allows the transmitter and receiver unit(s) to be powered by only one power supply connected to the transmitter unit
    • Transmitter unit supports two HDMI loop-outs for addition local display connections
    • Receiver unit supports 2 HDMI outputs for more display connections 
      • Note: Additional Receiver (part# CE-H24P11-S1) sold separately.
    • Supports EDID management for increased device compatibility
    • Supports resolution auto-down scaling from 4K to 1080p allowing displays of different capabilities to be connected simultaneously
    • Pure unaltered uncompressed 7.1ch digital HDMI over CAT5e/6 cable transmission offers the best audio signal
    • DTS-HD Master Audio and Dolby TrueHD high bit rate audio for true sound compatibility
    • Supports full bi-directional IR pass-through signal from 30KHz to 56KHz frequency
    *Notes:
    Below are limitations associated with 4K content down scaling:
       - Down scaling to 720p and 480p is not supported
       - YUV 4:2:2 down scaling is not supported
       - Frame rate conversion (e.g., 60Hz to 24Hz) is not supported
       - [email protected] monitors will display in [email protected] when the source content is [email protected]
       - The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally
    • HDMI Compliance: HDMI 2.0a
    • Video bandwidth: Single-link 600MHz (18Gbps)
    • Video support: HDR 4Kx2K @60Hz (4:2:0 10-bit) / 4Kx2K @60Hz (4:4:4 8-bit)
    • Resolution up to 3840x2160 @60Hz
    • HDCP Compliance: HDCP bypass
    • Auto equalization
    • Bi-directional IR pass-through
    • RS-232 Pass-thru: Up to 115,200bps
    • Product:
      • Transmitting unit (TX):
        • Dimensions: 12.8" (L) x 0.98" (H) x 5.83" (W)
        • Weight: 3.06 lbs
        • Connectors:
          • 1x 19-pin HDMI, Type A, Female, Input
          • 1x 3.5mm jack, IR, Input/ 1x 3.5mm jack, IR, Output
          • 1x Power jack
          • 4x 8-pin, RJ45, HDMI signal, Output
          • 2x 19-pin HDMI, Type A, Female, Loop-out
          • 1x Dip Switch, EDID management
          • 1x RS-232, Input/Output
          • Micro-USB, Firmware update
      • Receiving unit (RX):
        • Dimensions:  5.47" (L) x 0.75" (H) x 2.76" (W)
        • Weight: 0.39 lbs
        • Connectors:
          • 1x 8-pin, RJ45, HDMI signal, input
          • 1x 3.5mm jack, IR, Input/ 1x 3.5mm jack, IR, Output
          • 1x RS-232, Input/Output
          • 1x 3-Pin dip Switch, EDID management
          • 2x 19-pin HDMI, Type A, Female, Output
    • Housing material: Metal
    • ESD protection:  Human body model — ±15kV (air-gap) & ±8kV (contact)
    • Supported Cable Length (CAT5):
    • Power adapter:
      • Input: 100-240VAC, 50/60 Hz
      • Output  DC12V/7.5A
      • UL:E163743 Class:VI
    • Environmental conditions:
      • Operating temperature: 32 to 104°F (0 to 40°C)
      • Storage temperature: -4 to 140°F  (-20 to 60°C)
      • Relative humidity:  20~90% RH [no condensation]
    • Certifications/Standards: FCC, CE, RoHS
    • TAA Compliant
    • Warranty: 3 years limited
    • Country of origin: Taiwan
    *Notes:
    Below are limitations associated with 4K content down scaling:
       - Down scaling to 720p and 480p is not supported
       - YUV 4:2:2 down scaling is not supported
       - Frame rate conversion (e.g., 60Hz to 24Hz) is not supported
       - [email protected] monitors will display in [email protected] when the source content is [email protected]
       - The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally

    Requirements

    • HDMI source device such as computers, game consoles, Blu-ray/DVDplayers, and media players 
    • HDMI displays, monitors, and HD TVs
    *Notes:

    Below are limitations associated with 4K content down scaling:
       - Down scaling to 720p and 480p is not supported
       - YUV 4:2:2 down scaling is not supported
       - Frame rate conversion (e.g., 60Hz to 24Hz) is not supported
       - [email protected] monitors will display in [email protected] when the source content is [email protected]
       - The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally

    Package Contents

    • HDMI 2.0 4K HDR 1x4 Splitter HDBaseT Extender (1 Transmitter, 3 Receivers)
      • Additional Receiver unit (part# CE-H24P11-S1) sold separately
    • Power adapter DC 12V / 7.5A x1
    • IR blaster (1pc)
    • IR Receiver (3pcs)
    • Terminal block (4pcs)
    • Mounting kit (Screw kit:4x20 mm 8pcs, Mounting ears 6pcs, Screw kit: 3x4 mm 12pcs)
    • Rubber pad (4pcs)
    • User Manual

Downloads

No Questions
Please note that you must be logged in to submit questions.