HDMI 2.0 4K HDR over HDBaseT Receiver

Receives HDMI signals over CAT5e/6 cable up to 198ft with resolution auto-scaling, IR control, and Power over Cable support
In stock
Quantity in stock: 14
SKU
CE-H24P11-S1
$259.99

We will send this product within 1 business day

Lifetime technical support on all of our product

45 day return and money back guarantee

    • Receives Full HD 1080p HDMI signals up to 198ft (60m) and [email protected] signals up to 114ft (35m) over CAT5e/6 cable
      • Provides additional receiver unit for HDMI 2.0 4K HDR 1x4 Splitter HDBaseT Extender with Auto-scaling (part# CE-H24N11-S1) sold separately
    • Supports [email protected] YUV 4:4:4 8-bit, [email protected] HDR YUV 4:2:0 10-bit resolutions
    • Supports PoC (Power over Cable) technology which allows the transmitter and receiver unit(s) to be powered by only one power supply connected to the transmitter unit
    • Receiver unit supports 2 HDMI outputs for more display connections
    • Supports EDID management for increased device compatibility
    • Supports resolution auto-down scaling from 4K to 1080p allowing displays of different capabilities to be connected simultaneously
    • Pure unaltered uncompressed 7.1ch digital HDMI over CAT5e/6 cable transmission offers the best audio signal
    • DTS-HD Master Audio and Dolby TrueHD high bit rate audio for true sound compatibility
    • Supports full bi-directional IR pass-through signal from 30KHz to 56KHz frequency
    *Notes:
    Below are limitations associated with 4K content down scaling:
       - Down scaling to 720p and 480p is not supported
       - YUV 4:2:2 down scaling is not supported
       - Frame rate conversion (e.g., 60Hz to 24Hz) is not supported
       - [email protected] monitors will display in [email protected] when the source content is [email protected]
       - The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally
    • HDMI Compliance: HDMI 2.0a
    • Video bandwidth: Single-link 600MHz [18Gbps]
    • Video support: HDR 4Kx2K @60Hz (4:2:0 10-bit) / 4Kx2K @60Hz (4:4:4 8-bit)
    • Resolution up to 3840 x 2160 @60Hz
    • HDCP compliance: HDCP bypass
    • Auto equalization
    • Bi-directional IR pass-through
    • RS-232 Pass-thru:  Up to 115,200bps
    • Product:
      • Dimensions:  5.47" (L) x 0.75" (H) x 2.76" (W)
      • Weight: 0.39 lbs
      • Connectors:
        • 1x 8-pin, RJ45, HDMI signal, input
        • 1x 3.5mm jack, IR, Input/ 1x 3.5mm jack, IR, output
        • 1x RS-232, Input/output
        • 1x 3-Pin dip Switch, EDID management
        • 2x 19-pin HDMI, Type A, Female, output
    • Housing material: Metal
    • ESD protection: Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge]
    • Supported Cable Length (CAT5e):
    • Environmental conditions:
      • Operating temperature:  32 to 104°F (0 to 40°C)
      • Storage temperature: -4 to 140°F (-20 to 60°C)
      • Relative humidity:  20% to 90% RH [no condensation]
    • Certifications/Standards:  FCC, CE, RoHS
    • TAA Compliant
    • Warranty: 3 years limited
    • Country of origin: Taiwan
    *Notes:
    Below are limitations associated with 4K content down scaling:
       - Down scaling to 720p and 480p is not supported
       - YUV 4:2:2 down scaling is not supported
       - Frame rate conversion (e.g., 60Hz to 24Hz) is not supported
       - [email protected] monitors will display in [email protected] when the source content is [email protected]
       - The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally

    Requirements

    • HDMI 2.0 4K HDR 1x4 Splitter HDBaseT Extender with Auto-scaling (part# CE-H24N11-S1) sold separately
    *Notes:
    Below are limitations associated with 4K content down scaling:
       - Down scaling to 720p and 480p is not supported
       - YUV 4:2:2 down scaling is not supported
       - Frame rate conversion (e.g., 60Hz to 24Hz) is not supported
       - [email protected] monitors will display in [email protected] when the source content is [email protected]
       - The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally

    Package Contents

    • HDMI 2.0 4K HDR over HDBaseT Receiver 
    • IR Receiver Cable
    • Terminal block 
    • Mounting kit (Screw kit: 4x20 mm 2pcs, Mounting ears 2pcs, Screw kit: 3x4 mm 4pcs)
    • Quick Start Guide

Downloads

No Questions
Please note that you must be logged in to submit questions.