1x4 HDMI Splitter with 3D and 4Kx2K

Broadcasts HDMI signals to four displays simultaneously
Quantity in stock: 4

We ship all orders within 1 business day

Lifetime technical support on all of our products

45-day return window and money-back guarantee


    • HDMI and HDCP compliant
    • Supports up to 48-bit Deep Color
    • Supports full 3D
    • Supports Auto EDID
    • Supports input transmission distance up to 5M and 15M for output
    • USB firmware update option
    • Easy installation
    • Metal housing for better RF shielding


    • Chipset: EP9144 + EPF021
    • HDMI and HDCP compliant
    • Supports resolution 480i, 480P, 576i, 720p, 1080i, 1080p, 4Kx2K
    • Wide frequency range: 25MHz to 340MHz
    • Video bandwidth: 10.2Gbps
    • Supports 1080p and up to 4Kx2K resolution
    • Input TMDS signal: 1.2V (peak-to-peak)
    • Input DDC signal: 5V (peak-to-peak, TTL)
    • Product:
      • Dimensions: 4.72" (W) x 2.85" (H) x 0.94" (D)
      • Weight: 0.56 lbs
      • Color: Black
      • Housing: Metal
    • Connector:
      • 1x 19-pin, HDMI, Type-A, Female, Input
      • 4x 19-pin, HDMI, Type-A, Female, Output
      • 1x 4-pin, USB, Type-A, Female, Firmware update
    • Power Adapter:
      • Input: 100-240VAC, 50/60 Hz
      • Output: 5V DC, 2A
    • Environmental conditions:
      • Operating temperature: 32 to 122 degrees F
      • Storage temperature: -4 to 140 degrees F
      • Operating humidity: < 85% RH (non-condensing)
    • Certifications/Standards: FCC, CE, RoHS
    • Warranty: 3 years limited
    • Country of origin: China

    Package contents

    • 1x4 HDMI Splitter with 3D and 4Kx2K
    • Power adapter
    • Housing rubber pads (4)
    • Installation guide
Channel Codes
  • Ingram Micro: QR1320
  • Tech Data: 10982994
  • ASI: 134116
  • Synnex: 3454526


04-0841a.pdf Download manual


Firmware update instructions
Download Firmware
Firmware Installation Steps: 1. Save the "BIN" file to your thumb drive and put in on the root. (Note: Please don't change the file name.) 2. Power off the splitter, then insert your thumb drive to the product's "Update" usb port. (Don't connect the power adapter until instructed to do so.) 3. Connect the power adapter to HDMI splitter then wait around 1 to 2 min for the firmware update process to complete. (If your thumb drive has an LED then wait until it stops flashing.) 4. After the firmware update completes, remove the thumb drive and power cycle the HDMI splitter. 5. Make sure you always connect the lowest resolution monitor/TV to the HDMI Splitter's HDMI output port1.

Frequently Asked Questions (Q&A)

Q: Can this extend to 4 different screens?

No, it can not extend to 4 different screens. All splitter outputs will always have the same screens

Please note that you must be logged in to submit questions.