HDMI Over IP Extender with IR - Decoder (RX)

  • HDMI over HDbitT
  • IP Extender
  • 394ft/120m
  • HDCP 1.4
  • 1080p@60Hz
  • Cat5e/6/7
  • One to Many
  • Many to Many
  • H.264 Compression
  • IR Extension
  • Switch Button
  • Reset Button
  • RS-232 Control
In stock
Quantity in stock: 106

We ship all orders within 1 business day

Lifetime technical support on all of our products

45-day return window and money-back guarantee


    Receives High Definition 1080p HDMI signals using advanced HDbitT technology through economical CAT5e/6/7 cabling from encoder (TX) unit up to 120 meters away, use with HDMI Over IP Extender with IR - Encoder (TX) (part # CE-H23B11-S2) sold separately



    Extend and control HDMI signals with stereo audio up to 394ft (120m) to the remote display with HDbitT over IP technology and supports multi-casting connection for optimal (the best) application


    What is HDbitT?

    HDbitT is a new generation audio/video digital connection transmission protocol solution. Provides stable performance, long-distance transmission, and high-definition signal


    Further Distance

    This HDMI over IP Extender with IR-Kit designed for transmission/security, HDMI signals up to 394ft (120m) through HDbitT protocol and Gigabit Ethernet switch to a remote HDMI display


    Highly Scalable

    Works as a scalable TX/RX matrix over the dedicated IP network and allows up to 256 total units, limited to 100 units per transmitter, and extends/splits HDMI signals to multiple displays. The additional encoder (TX) unit (part#- CE-H23B11-S2) and decoder (RX) unit (part#- CE-H23C11-S2) is sold separately
    *Note: IGMP Gigabit Switch is recommended for best performance and reliability




    Multicasting connection

    Transmitting data from multiple HDMI sources over an IGMP network switch to the intended decoders (RX) via encoders (TXs)


    Full HD Resolution

    Supports high-definition video resolution up to1080p (1920x1080) @60Hz, HDCP 1.4 to deliver a clear picture quality and local HDMI loop-out allows you to monitor the extended display from the source location

    IR Extension

    IR pass-through feature allows remote control of the HDMI source device and playback function at the remote display

    High Performance

    Offers a true 10.2Gbps video bandwidth and supports stereo audio


    RS-232 Control

    Bi-direction function and pass-through connection to control RS-232 enable devices in either direction

    Flexible Control

    Easily switch and setup remote displays via front panel LED digital channel buttons or attached remote control, and video control software
    Video control software: to select and switch between source devices

    Multiple Connectivity Ports

    Comes with one HDMI video output port, one RJ45 network port, one RS-232 port, one 3.5mm IR receiver port, Channel switch buttons, Connect TX channel buttons, one reset button, one DC power jack (5V/2A)





    H.264 Compression

    HDMI signal is encoded into H.264 to be sent through the network router or switch then decoded before arriving at the specified display. Ensures enough bandwidth is available to pass multiple HDMI signals over one network

    Maximum Compatibility

    Supports Plug-n-play. No driver installation required The reset button allows displays to be re-detected if no displays are detected

    Metal Housing Design

    Protects the inside PCBA, also enhance the heat dissipation for better performance. Military-grade component for long service life


    • Video Conference room• Show room• Classroom• Broadcasting• Digital signage• Dental office
    • Hospitality• Supermarket• Shopping center• Sport bar• Restaurant• Retail
    • Trade show• Church• Airport• Control center• Security center• Surveillance control center

    Need to Know Before Buying

    1. Please confirm your computer or device with HDMI port


    2. Check the extended and local displays/monitors with HDMI port and support 1080p@60Hz resolution


    3. Please ensure using UTP Cat5e/Cat6/Cat7 cable for the best video quality and accurate transmission distance

    4. IGMP Switch or Managed Ethernet Switch is recommended for the best performance and reliability

    5. Encoder (TX) channel must be different, otherwise the system will be broken down

    6. This decoder (RX) (CE-H23C11-S2) is for (CE-H23B11-S2) only and CE-H23C11-S1 is replaced by part# CE-H23C11-S2


    HDMI 1x output
    Resolution 1080p (1920x1080) / 1080i / 720p / 480p @60Hz, HDCP 1.4
    Transport protocol
    HDbitT protocol Audio/video digital connection transmission protocol
    Stereo audio from HDMI, support 192Kbps bit rate
    IR pass-through
    Allows remote control of the HDMI source device and playback function at the remote display
    Full frequency: 20KHz to 60KHz
    RS-232 control
    Bi-direction function and pass-through connection to control RS-232 enables devices in either direction
    Power adapter Input: 100-240V/50-60Hz, Output: DC 5V/2A
    UL listed E335801/Level: VI
    Environmental conditions
    Operating temperature 32 to 122 degrees F
    Storage temperature 14 to 144 degrees F
    Relative humidity 0% to 90% RH (non-condensing)
    Product Info
    Decoder unit (RX) Dimensions: 5.27” (L) x 0.94” (H) x 3.30" (W)
    Weight: 0.60lbs
    Color: black
    Housing material: metal
    Unit package
    Dimensions 7.83” (L) x 3.15” (H) x 5.87" (W)
    Weight 1.37 lbs
    UPC code: 662774045115
    Warranty: 2 years limited
    Country of origin: China



    Decoder unit (RX):

    • 1x 19-pin, HDMI, Female (output)
    • 1x 3-pin, RS-232 terminal block, Female
    • 1x 3.5mm infrared jack, IR receiver (input)
    • 1x 8-pin, RJ45 (input)
    • 2x Switch RX channel buttons, up/down
    • 2x TX channel buttons, up/down (for TX connection)
    • 1x Reset button
    • 1x DC power jack, 5V/2A

    Package contents

    • 1x HDMI over IP Extender with IR- Decoder (RX)
    • 1x 3.5mm IR receiver extension cable
    • 1x Remote control (for setting TX & RX channels)
    • 1x 3-pin, RS-232 phoenix connector
    • 1x DC power adapter (5V/2A)
    • 1x Installation kit
    • 1x User Reference Guide


04-1362b.pdf Download manual

Frequently Asked Questions (Q&A)

Q: Why the Over IP extender video can not cross the Router?

The Over IP extender are using Multicast Protocol, please check do the Switch and Router can support Multicast packet pass through

Please note that you must be logged in to submit questions.