Skip to the beginning of the images gallery

HDMI 2.0 4K HDR 1x2 Splitter HDBaseT Extender with Auto-scaling

Extends HDMI signals to two HDMI displays over CAT5e/6 cable up to 198ft with resolution auto-scaling, IR control, and Power over Cable support

In stock

Quantity in stock: 34

SKU

CE-H24M11-S1

$799.99

Overview

Extends Full HD 1080p HDMI signals up to 198ft (60m) and [email protected] signals up to 114ft (35m) over CAT5e/6 cable Supports [email protected] YUV 4:4:4 8-bit, [email protected] HDR YUV 4:2:0 10-bit Supports PoC (Power over Cable) technology which allows the transmitter and receiver unit(s) to be powered by only one power supply connected to the transmitter unit Supports two HDMI loop-outs for additional local display connections Supports EDID management for increased device compatibility Supports resolution auto-down scaling from 4K to 1080p allowing displays of different capabilities to be connected simultaneously Pure unaltered uncompressed 7.1ch digital HDMI over CAT5e/6 cable transmission offers the best audio signal DTS-HD Master Audio and Dolby TrueHD high bit rate audio for true sound compatibility Supports bi-directional IR pass-through signal from 30KHz to 56KHz frequency *Notes: Below are limitations associated with 4K content down scaling: - Down scaling to 720p and 480p is not supported - YUV 4:2:2 down scaling is not supported - Frame rate conversion (e.g., 60Hz to 24Hz) is not supported - [email protected] monitors will display in [email protected] when the source content is [email protected] - The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally

Specifications

HDMI compliance: HDMI 2.0a Video bandwidth: Single-link 600MHz (18Gbps) Video support: HDR [email protected] (4:2:0 10-bit) / [email protected] (4:4:4 8-bit) Resolution up to 4K ([email protected]) HDCP compliance: HDCP pass through Auto equalization Bi-directional IR pass-through RS-232 Pass-through: Up to 115,200bps Product: Transmitting unit (TX): Dimensions: 9.29" (L) x 1.02" (H) x 4.6" (W) Weight: 1.85 lbs Connectors: 1x 19-pin HDMI, Type A, Female, Input 1x 3.5mm jack, IR, Input 1x 3.5mm jack, IR, Output 1x Power jack 2x 8-pin, RJ45, HDMI signal, Output 2x 19-pin HDMI, Type A, Female, Output 1x 2-Pin Dip switch, Operating mode/Firmware update 1x Rotary dial, EDID management 1x RS-232, Input/Output 1x Micro-USB, Firmware update Receiving unit (RX): Dimensions: 4.65" (L) x 0.63" (H) x 2.83" (W) Weight: 0.33 lbs Connectors: 1x 8-pin, RJ45, HDMI signal, Input 1x 3.5mm jack, IR, Input 1x 3.5mm jack, IR, Output 1x RS-232, Input/Output 1x 1-Pin Dip switch, Operating mode/Firmware update 1x 19-pin HDMI, Type A, Female, Output Housing material: Metal ESD protection: Human body model - ±15kV (air) & ±8kV (contact) Transmission distance (CAT5e/6): [email protected]: 198ft (60m) [email protected]: 114ft (35m) Power adapter: Input: 100-240VAC, 50/60 Hz Output: DC 12V/3.33A UL: E161451 Environmental conditions: Operating temperature: 32 to 104° F (0 to 40° C) Storage temperature: -4 to 140° F (-20 to 60° C) Relative humidity: 20 to 90% RH (non condensing) Certifications/Standards: FCC, CE, RoHS TAA compliant Warranty: 3 years limited Country of origin: Taiwan *Notes: Below are limitations associated with 4K content down scaling: - Down scaling to 720p and 480p is not supported - YUV 4:2:2 down scaling is not supported - Frame rate conversion (e.g., 60Hz to 24Hz) is not supported - [email protected] monitors will display in [email protected] when the source content is [email protected] - The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally

Requirement/Contents

Requirements HDMI source device such as computers, game consoles, Blu-ray/DVDplayers, and media players HDMI displays, monitors, and HD TV Notes: Below are limitations associated with 4K content down scaling: - Down scaling to 720p and 480p is not supported - YUV 4:2:2 down scaling is not supported - Frame rate conversion (e.g., 60Hz to 24Hz) is not supported - [email protected] monitors will display in [email protected] when the source content is [email protected] - The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally Package Contents* HDMI 2.0 4K HDR 1x2 Splitter HDBaseT Extender (1 Transmitter, 2 Receivers) Power adapter DC 12V / 3.3A IR Blaster cable (1pc) IR Receiver cable (2pcs) Terminal block (3pcs) Mounting kit (Screw kit: 4x20 mm 6pcs, Mounting ears 4pcs, Screw kit: 3x4 mm 8pcs) Rubber pad (4pcs) User Manual

Downloads

Downloads

Q&A

No Questions

Please note that you must be logged in to submit questions.

HDMI 2.0 4K HDR 1x2 Splitter HDBaseT Extender with Auto-scaling

Downloads

About SIIG

IT Products

AV Products

Company Info