HDMI HDbitT Over IP Extender with IR - Receiver

  • HDMI over HDbitT
  • IP Extender
  • 394ft/120m
  • HDCP 1.2
  • 1080p@60Hz
  • Cat 5e/6/7
  • One to One
  • One to Many
  • VLAN support
  • IR Extension
  • Reset Button
In stock
Quantity in stock: 63

We ship all orders within 1 business day

Lifetime technical support on all of our products

45-day return window and money-back guarantee


    HDMI HDbitT Over IP Extender - RX, 1080p@60Hz, Receives HDMI signal up to 120m over single Cat5e/6/7 cable with IR support



    Extend HDMI audio and video signals up to 394ft (120m) via Cat 5e/6/7 cable for remote display/monitor using best network transport protocol and IR remote control of source devices


    What is HDbitT?
    HDbitT is a new generation audio/video digital connection transmission protocol solution. Provides stable performance, long-distance transmission, and high-definition signal


    Extend Distance
    This HDMI HDbitT over IP Extender with IR designed for transmission/security, HDMI signals up to 394ft (120m) through HDbitT protocol and Gigabit Ethernet switch to a remote HDMI display


    Highly Scalable
    Works as a scalable TX/RX matrix over the dedicated IP network and allows up to 256 total units, and extends/splits HDMI signals to multiple displays. The additional receiver unit (part#- CE-H26U11-S1) is sold separately, Kit (part#- CE-H26T11-S1)

    *Note: IGMP Gigabit Switch is recommended for best performance and reliability




    VLAN setup supported
    Create a separate VLAN for each TX and its corresponding RX’s

    resFull HD Resolution
    Supports high-definition video resolution up to 1080p (1920x1080) @60Hz, HDCP 1.2 to deliver a clear picture quality

    IR Extension
    IR pass-through feature allows remote control of the HDMI source device and playback function at the remote display

    High Performance
    Offers a true 10.2Gbps video bandwidth and supports stereo audio


    Multiple Connectivity Ports
    Comes with one HDMI video input port, one HDMI output port, two RJ45 network ports, one 3.5mm IR emitter port, one 3.5mm IR receiver port, two reset buttons, two DC power jacks (5V/1A)




    Maximum Compatibility
    Supports Plug-n-play. No driver installation required The reset button allows displays to be re-detected if no displays are detected

    Metal Housing Design
    Protects the inside PCBA, also enhance the heat dissipation for better performance. Military-grade component for long service life


    • Digital signage• Broadcasting• Video conference room• Show room• Classroom• ental office
    • Hospitality• Supermarket• Shopping center• Sport bar• Restaurant• Retail
    • Trade show• Church• Airport• Control center• Security center• Surveillance control center

    Need to Know Before Buying

    1. Please confirm your computer or device with HDMI port


    2. Check the extended display/monitor with HDMI port and supports 1080p@60Hz resolution


    3. Please ensure using UTP Cat5e, Cat6 or Cat7 cable for the best video quality and accurate transmission distance

    4. IGMP Switch or Managed Ethernet Switch is recommended for the best performance and reliability

    5. This receiver (CE-H26U11-S1) is for CE-H26T11-S1 only and CE-H24U11-S1 is replaced by part# CE-H26U11-S1


    HDMI 1x output
    Resolution 1080p/1080i/720p/480i/480p @60Hz
    Transport protocol
    HDbitT protocol audio/video digital connection transmission protocol
    Stereo audio from HDMI, support 192Kbps bit rate
    IR pass-through
    allows remote control of the HDMI source device and playback function at the remote display
    Full frequency: 20KHz to 60KHz
    Power adapter Input: 100-240V/50-60Hz, Output: DC 5V/1A
    UL listed E335801/Level: VI
    Environmental conditions
    Operating temperature 32 to 104 degrees F
    Storage temperature 14 to 158 degrees F
    Relative humidity 5% to 90% RH (non-condensing)
    Product Info
    Receiver unit (RX) Dimensions: 3.70” (L) x 0.93” (H) x 3.81" (W)
    Weight: 0.33lbs
    Color: black
    Housing material: metal (Housing with wall mount design)
    Unit package
    Dimensions 5.91” (L) x 3.03” (H) x 4.61" (W)
    Weight 0.71 lbs
    Warranty: 2 years limited
    Country of origin: China




    • 1x 3.5mm Infrared jack, IR receiver
    • 1x 8-pin, RJ45
    • 1x Rest button
    • 1x DC power jack, 5V/1A


    • 1x 19-pin, HDMI, Female

    Package contents

    • 1x HDMI HDbitT Over IP Extender with IR - Receiver
    • 1x 3.5mm IR receiver extension cable
    • 1x DC power adapter (5V/1A)
    • 1x User Reference Guide


04-1358a.pdf Download manual

Frequently Asked Questions (Q&A)

Q: Why the Over IP extender video can not cross the Router?

The Over IP extender are using Multicast Protocol, please check do the Switch and Router can support Multicast packet pass through

Please note that you must be logged in to submit questions.