Wallplate HDMI HDBaseT Kit

Wallplate design allows you to select and switch between any of the 2 HDMI source devices to display on an HDMI display up to 30 meters with audio output and microphone inputs. Great for education, boardrooms, waiting rooms
Out of stock

We will send this product within 1 business day

Lifetime technical support on all of our product

45 day return and money back guarantee

    • Allows you to select and switch between any of the 2 HDMI source devices to display on an HDMI display up to 30 meters away
    • Transmits HDMI signal via Cat5e/6 cable up to 30m at 1920x1200 @60Hz resolution
    • Convenient and easy-to-use control device for presentation show rooms, classrooms, and boardrooms
    • Supports front panel button control and web-based GUI control
    • Supports PoC solution, to power the transmitter and control panel at the Receiver over CAT cable
    • Receiver provides an RS-232 interface to connect with a projector, and then control it by sending RS-232 commands via web-based GUI
    • Supports IR learning of the display device's (projector, TV, etc.) IR remote for easy device control at the Control Panel
    • Compliant with HDMI 1.3 and HDCP 1.4
    • Video bandwidth up to 10.2Gbps (340MHz per channel)
    • Suport output resolution up to 1920x1200@60Hz
    • Support Mic input
    • Customizable Control Panel supports IR Learning for convenient device control
    • Supports UPNP
    • Firmware update via Micro USB port
    • Transmission protocol: HDBaseT technology
    • Transmission distance: up to 98 ft (30m) for 1080p @60Hz
    • Product:
      • Transmitting unit (TX):
        • Dimensions: 4.14" (W) x 3.50" (H) x 1.74" (D)
        • Weight: 0.53 lbs
        • Connectors:
          • 2x 19-pin HDMI, Type A, Female, Input
          • 1x 8-pin, RJ45, HDBaseT/PoC output
          • 1x 8-pin, RJ45, Connect to Control Panel Power/RS-232
          • 1x Blue-Backlight button, Source select
          • 1x 4-pin USB Type-B, Female, Connect to PC
          • 1x 5-pin Micro USB, Firmware update
          • 1x Reset button
      • Receiving unit (RX):
        • Dimensions: 9.84" (W) x 1.22" (H) x 5.12" (D)
        • Weight: 3.31 lbs
        • Connectors:
          • 1x 19-pin HDMI, Type A, Female, Output
          • 1x 8-pin, RJ45, HDBaseT/PoC input
          • 1x 8-pin, RJ45, TCP/IP Network
          • 1x 4-pin USB, Touchscreen
          • 1x 3.5mm jack, IR Out
          • 1x 3-pin, RS-232, Phoenix connector
          • 1x 2-pin, Remote Mute, Phoenix connector
          • 1x 3-pin, Audio Line out, Phoenix connector
          • 1x 3-pin, MIC input, Phoenix connector
          • 1x 4-pin, 2x20Watt @4ohms, Power connector
          • 1x Power jack, DC 24V input
      • Control Panel:
        • Dimensions: 4.49" (W) x 2.76" (H) x 1.34" (D)
        • Weight: 0.31 lbs
        • Connectors:
          • 1x 4-pin USB Type-A, U-disk configuration data
          • 1x 8-pin, RJ45, Connect to Transmitter Power/RS-232
          • 1x Volume Knob, volume control
          • 4x Blue-backlight button, ON / HDMI1 / HDMI 2 / OFF control
          • 1x IR sensor, receive IR signal
          • 1x 3-Pin, RS-232, Phoenix connector
          • 1x 5-pin, Micro USB, Firmware update
    • Power adapter:
      • Input: 100-240V / 50-60Hz
      • Output: DC 24V/2.71A
    • Environmental conditions:
      • Operating temperature: 32 to 122 degrees F
      • Storage temperature: 14 to 158 degrees F
      • Relative humidity: 10% to 90% RH (non-condensing)
    • Certifications/Standards: FCC, CE, RoHS
    • Warranty: 3 years limited
    • Country of origin: China

    Package Contents

    • Wallplate HDMI HDBaseT Kit
    • IR Receiver cable
    • IR Remote control (no battery)
    • Power adapter
    • RS232 cable
    • Screw kit (4pcs)
    • Rubber pads (4pcs)
    • User manual


No Questions
Please note that you must be logged in to submit questions.