1x4 HDMI Splitter, Over IP Extender Kit, 1080p 60Hz, 120m

Extends 1080p HDMI signal up to 394ft over Cat6 cable to up to 4 displays, IR control, works with dedicated Gigabit network switches for more displays and extension
Out of stock

We will send this product within 1 business day

Lifetime technical support on all of our product

45 day return and money back guarantee


    • With a single Cat6 cable, you can easily extend HDMI audio/video signals up to 394ft (120m) with our 1x4 HDMI Splitter HDbitT over IP Extender Kit - 120m. Direct 1-to-1 connection, 1-to-Many through Gigabit network switches. Additional receivers, part# CE-H26U11-S1), are sold separately
    • Features cascade connection of up to 30 receivers per transmitter. 1-to-many configuration through 1) Unmanaged/Dedicated Gigabit switches, 2) Smart Gigabit switches with VLAN to segregate video traffic from the rest of the LAN. Many-to-many configuration is also supported via VLAN setups. Note that each VLAN can only accommodate 1 transmitter (TX). Note: We recommend using SIIG's 24-port AV Over IP Smart Ethernet Switch, part# CE-SW0111-S1, sold separately
    • Delivers crystal clear Full HD content up to [email protected] resolution. Supports up to 1080p; supports 408i/480p @60Hz, 576i/576p @50Hz, 720p @50/60Hz, 1080i/1080p @50/60Hz; Auto adjustment for different cable lengths to produce the best video/audio experience. Supports 2-channel Stereo Audio. * Note: There’s a 250ms or less delay/latency due to data compression. Not recommended for real-time applications, such as PC gaming
    • IR remote control through Cat6 cable allow source device to recognize remote commands; You can control the HDMI source device at a secondary location with the included IR cables that forward commands over a Cat6 cable for convenience. We recommend using high performance pure COPPER Cat6 cables to ensure reliable performance
    • High quality durable surface mountable metal housing with ventilation panels provides excellent heat dissipation and a higher level of RF/EMI shielding to ensure reliable performance and system stability during long hours of non-stop operation
    • Plug-n-Play installation, no software installation required, backed by a 2-year limited warranty

    Note: Replaces CE-H25F11-S1


    • Transport protocol: HDbitT
    • Compliant with HDCP 1.2
    • Transmission distance: Up to 394ft (120m) via single Cat6 cable at [email protected] resolution
    • Video resolution: 480p / 720p / 1080i / [email protected]
    • Audio input: 7.1 Channel, PCM, DTS, AC3 audio
    • IR signal: Unidirectional full frequency 20KHz to 60KHz
    • Housing: Aluminum wall mount design
    • Network cable: UTP/STP CAT6/6a/7, solid copper
    • Connection topology:
      • Direct connection: 1x4
      • Cascade: 1-to-many through dedicated IGMP Gigabit switches, up to 30 receivers per TX
    • Product:
      • Transmitting unit (TX):
        • Dimensions: 9.92" (L) x 0.98" (H) x 3.82" (W)
        • Weight: 1.34 lbs
        • Connectors:
          • 1x 19-pin HDMI, Type A, Female, Input
          • 1x 3.5mm jack, IR blaster, Output
          • 4x 8-pin, RJ45, HDbitT signal, Output
          • 1x Power jack, 5V/2A, Input
          • 1x Reset button
      • Receiving unit (RX):
        • Dimensions : 3.81" (L) x 0.93" (H) x 3.70" (W)
        • Weight: 0.33 lbs
        • Connectors:
          • 1x 19-pin HDMI, Type A, Female, Output
          • 1x 3.5mm jack, IR receiver, Input
          • 1x 8-pin, RJ45, HDbitT signal, Input
          • 1x Power jack, 5V/1A, Input
          • 1x Reset button
      • Unit Package:
        • Dimensions: 14.49" (W) x 2.44" (H) x 8.46" (D)
        • Weight: 5.51 lbs
    • Power adapter:
      • Input: 100-240V / 50-60Hz
      • TX: DC 5V/2A
      • RX: DC 5V/1A
      • UL listed: E335801 / Level: VI
    • Environmental conditions:
      • Operating temperature: 32 to 122 degrees F
      • Storage temperature: 14 to 158 degrees F
      • Relative humidity: 0 to 90% RH (non-condensing)
    • Certifications/Standards: FCC, CE, RoHS
    • Warranty: 2 years limited
    • Country of origin: China

    System Requirements

    • Cat6/6a/7 cable with T568B wiring standard (solid copper wire recommended)
    • HDMI displays and cables
    • Unmanaged dedicated IGMP Gigabit network routers or switches (for cascade connection)
    • HDMI HDbitT Over IP Extender with IR - Receiver, part# CE-H26U11-S1, sold separately to add more displays via cascade connection

    Package contents

    • 1x4 HDMI Splitter HDbitT over IP Extender - 120m (1 TX + 4 RXs)
    • Power adapter (5pcs):
      • 5V/2A (1pc)
      • 5V/1A (4pcs)
    • IR Blaster cable (1pc)
    • IR Receiver cable (4pcs)
    • Quick Start Guide


Frequently Asked Questions (Q&A)

Q: Can this extend to 4 different screens?

No, it can not extend to 4 different screens. All splitter outputs will always have the same screens

Please note that you must be logged in to submit questions.