Features
Easily extend HDMI audio/video signals over a cost effective Cat5e/6 network cable, while maintaining signal strength and superior quality and supports up to 1080p resolution and extends transmission distance up to 164ft (50m) with nearly zero latency

Extend Distance
This Full HD HDMI Extender with IR designed to extends/splits HDMI signals up to 164ft (50m) through RJ45 network to a remote HDMI display for reliability transmission

IR Extension
Built-in on way IR signal extension modules allows remote controlling the HDMI source device at the receiver and playback at the distant display. Supports an IR signal in the 20-60KHz carrier frequency

*Note: Remote controller should be used within 15 feet of transmitter to send signal to the receiver. The best result for the sensor is to point directly
High Performance
Offers a true 10.2Gbps video bandwidth and supports pure unaltered uncompressed 7.1-ch. surround sound from HDMI

Full HD Video Resolution
Supports video resolution up to 1080p (1920x1080) @60Hz YUV 4:4:4 8-bit, HDCP 1.2 to deliver a clear picture quality and allows EDID auto-learning for remote and local displays

Multiple Connectivity Ports
Comes with one HDMI video input port, one HDMI video output port, two RJ45 network ports, one 3.5mm IR emitter port, one 3.5mm IR receiver port, two reset buttons, two DC power jacks (5V/1A)

Connection

Maximum Compatibility
Supports Plug-n-play and no driver installation required. The reset button allows displays to be re-detected if no displays are detected
Aluminum Alloy Housing Design
Small and durable design with an Aluminum alloy housing that improves heat dissipation and ensure system stability during long hours of operation. Integrated mounting bracket for easy placement

Need to Know Before Buying
1. Please confirm your computer or device with HDMI port

2. Check the extended and local displays/monitors with HDMI port and supports [email protected] resolution

3. After changing the display, please press the reset button to relearn the EDID
4. Please prepare a Cat6 extension cable over 100ft of 100% copper UTP cable for best transmission quality
5. This Full HD HDMI extender with IR is a point-to-point (1 to 1) connection and does not work with router or Ethernet switch
6. Replaces products: part# CE-H22D11-S1