Q: How to make a bootable usb flash drive to upgrade firmware?

Applies to the Following Products:

- SATA II PCIe RAID (SC-SAER12-S2)
- SATA II PCIe (SC-SAE012-S2)
- eSATA II PCIe Pro (SC-SAE412-S3)
- eSATA II PCIe i/e (SC-SAE212-S2)
- DP SATA 6Gb/s 2S1P PCIe (SC-SA0E12-S1)
- DP SATA 6Gb/s 2-Port PCIe (SC-SA0L11-S1)
- DP eSATA 6Gb/s 2-Port PCIe i/e (SC-SA0N11-S1)
- DP eSATA 6Gb/s 2-Port PCIe (SC-SA0M11-S1)
- Serial ATA PCI RAID (SC-SATR12-S4)
- Serial ATA PCI (SC-SAT212-S4)
- Serial ATA 4-channel RAID (SC-SA4R12-S2)
- SATA II-150 PCI RAID (SC-SA3012-S1)
- SATA II-150 PCI (SC-SA0012-S1)
- eSATA II-150 PCI i/e (SC-SA1012-S1)
- eSATA II-150 PCI (SC-SA2012-S1)

Description: 

How to make a bootable usb flash drive to upgrade firmware?

Solution: 

Refer to the provided link for how to make a bootable USB flash drive.

1. How to make a bootable DOS Flash drive: http://www.ehow.com/how_6801673_make-bootable-dos-flash-drive.html.

2. How to make a DOS boot CD: http://www.ehow.com/how_5891570_make-dos-boot-cd.html.

3. How to create an MS-DOS boot disk: http://www.ehow.com/how_2089400_create-msdos-boot-disk.html.